EXTERIOR
Harwood 3" cowl hood
Hood pins
Racecraft 17" race wing
Painted about 6 years ago (stayed original color) Wing was painted last year
INTERIOR
Wolfe 10 point chrommoly Roll Cage
Wolfe Aluminum Bulk Head
Through the floor subframe connectors
Scott Rod Fabrication
- Door Panels (with manual window conversion)
- Ash tray cover (Cut out for shifter mounting)
- E-Brake cover
- AC vent covers
-Shifter Cover with painless 4 switch panel
- Cowl Panel cover with carbon fiber Pod mount
- Radio and Climate control cover
· Rear mounted battery box, with Battery Cable
· Flaming Rivers battery "Push off" Battery shut off
· Stroud Window safety net
· Granet steering wheel with strange removable hub, 2 switches on steering wheel.
· Custom rear seat delete kit.
REAREND
Built 8.8 rear end
straightened and axle tubes welded
Trickflow differential cover
Strange 31 spline c-clip eliminator axles
strange 31 spline spool
Ford Racing 3:55 Gears
SUSPENSION
Rims and tires
4 Lug Weld Racing Drag light rims. front 15x3, 15x8 rear
Front has mickey thompson sportsman 26x7.5-15
Rear Mickey thompson ET street radial pro 275/60R 15
All tires have pretty good tread life on them. Rears have never seen a track!
REAREND
Team z mini tubs and shock relocation mount
Strange 10 way adjustable coil over shocks.
Team z Strip series upper control arms
Team z bolt in Anti roll bar
Double adjustable offset lower control arms W/O spring perch (for use with rear coil over or mini tubed cars)
Instant Center lower control arm brackets.
Strange 4 lug 4 piston rear disk brakes.
FRONTEND
manual brake conversion
Strange master cylinder
willwood brake proportioning valve
Hurst line lock
stock style slotted front disks
Hawk pads front
Flaming Rivers quick manual steering rack
Qa1 A-arms
GRIP caster camber plates
Team Z modular swapped k member (may work with other engines)
strange 10 way adjustable front coil over struts
car was aligned around 600 miles ago by NTB, have paper work from alignment.
Car was AWESOME when it was put together, parting out to get financially stable and get ready for marriage/a house. This was my
first car 11 years ago in Highschool, started out with only a flowmaster cat back exhaust. In pictures the front bumper is not on the car
due to taking it off to remove the engine a lot easier.
Car is located in Janesville WI, text me 6306248866 with questions or if you want more photos
Asking $6000 for this clean title roller. OR BEST OFFER!!!!!!!!!!!!!!!!!!!!
Harwood 3" cowl hood
Hood pins
Racecraft 17" race wing
Painted about 6 years ago (stayed original color) Wing was painted last year
INTERIOR
Wolfe 10 point chrommoly Roll Cage
Wolfe Aluminum Bulk Head
Through the floor subframe connectors
Scott Rod Fabrication
- Door Panels (with manual window conversion)
- Ash tray cover (Cut out for shifter mounting)
- E-Brake cover
- AC vent covers
-Shifter Cover with painless 4 switch panel
- Cowl Panel cover with carbon fiber Pod mount
- Radio and Climate control cover
· Rear mounted battery box, with Battery Cable
· Flaming Rivers battery "Push off" Battery shut off
· Stroud Window safety net
· Granet steering wheel with strange removable hub, 2 switches on steering wheel.
· Custom rear seat delete kit.
REAREND
Built 8.8 rear end
straightened and axle tubes welded
Trickflow differential cover
Strange 31 spline c-clip eliminator axles
strange 31 spline spool
Ford Racing 3:55 Gears
SUSPENSION
Rims and tires
4 Lug Weld Racing Drag light rims. front 15x3, 15x8 rear
Front has mickey thompson sportsman 26x7.5-15
Rear Mickey thompson ET street radial pro 275/60R 15
All tires have pretty good tread life on them. Rears have never seen a track!
REAREND
Team z mini tubs and shock relocation mount
Strange 10 way adjustable coil over shocks.
Team z Strip series upper control arms
Team z bolt in Anti roll bar
Double adjustable offset lower control arms W/O spring perch (for use with rear coil over or mini tubed cars)
Instant Center lower control arm brackets.
Strange 4 lug 4 piston rear disk brakes.
FRONTEND
manual brake conversion
Strange master cylinder
willwood brake proportioning valve
Hurst line lock
stock style slotted front disks
Hawk pads front
Flaming Rivers quick manual steering rack
Qa1 A-arms
GRIP caster camber plates
Team Z modular swapped k member (may work with other engines)
strange 10 way adjustable front coil over struts
car was aligned around 600 miles ago by NTB, have paper work from alignment.
Car was AWESOME when it was put together, parting out to get financially stable and get ready for marriage/a house. This was my
first car 11 years ago in Highschool, started out with only a flowmaster cat back exhaust. In pictures the front bumper is not on the car
due to taking it off to remove the engine a lot easier.
Car is located in Janesville WI, text me 6306248866 with questions or if you want more photos
Asking $6000 for this clean title roller. OR BEST OFFER!!!!!!!!!!!!!!!!!!!!
