Looking at a set of 19" wheels. Fronts are 19x9 with a +30 and the rear is 19x10 +45. What are you guys running for tires with a staggered set up that would get you 27" tall up front and 28" tall for the rear with a Drag Radial?
19" wheel tire options
- Thread starter GS357
- Start date
From the research I have done looking for my own setup about a 315/35/19 is what you can get in the rear and its 27.7'' tall depending on brand
I think the factory brembo 19'' tires i have are 255/40/19 and thats 27'' tall
I think the factory brembo 19'' tires i have are 255/40/19 and thats 27'' tall
Last edited:
I have only found 2 street/strip 19" drag radials around the stock diameter. Nitto NT05R 305/35-19 is 27.44" in diameter and Mickey Thompson ET Street Radial II 305/35-19 is 27.9" tall. Both recommend an 11" rim but I think they'll be fine on a 10".
Last edited:
That is what the GT500 is. Looks good in my opinion.
+1, the 19" front/20" rear looks best IMO. Plus the 28" rear tends to fill out the rear fenderwells better.
Last edited:
Anybody running 325/30-19's on rear?
A few are. Looks a lot better than 305/30. Just rediculously expensive!
Concur! Going to get my track pac wheels widened, but want confirmation that 325's will fit. Looks like about 2in clearance now with 285/40's
I have 305/30/19 and will do 325/30 next time. Mine will fit. I have Steeda Boss springs and adj. Panhard bar.
lots of guys around here are running 19-20" factory wheel setups widened to 12" and running 345's. Gotta modify some stuff underneath, about an hour each side worth is what shops charges.
Looks like I have about 11/2in more room before it hits some plastic interpanels and shock covers. That measuring off of stock track pac wheels and 285/40's. So 325's would need small mod to get them to work. Sway did not seem to be the first problem.
What was modded to fit 19 x 12" wheels w/345's?
Users who are viewing this thread
