Will 305/35-18 m/t dr fit an 18x11 wheel?
18x11 wheel
- Thread starter 1997Slobrah
- Start date
Did you ever get a reply on this? I am wondering the same thing... If it'll fit on a 18x11 rim and on a 02 Mustang GT with a 20mm offset
No I did not!
I apologize for the delay! Not sure how we missed this thread.
The approved rim width range for tire size 305/35-18 is 10" to 12" with 11" being the most ideal.
An 18x11 with a +20mm offset mounted with 305/35-18 tires will sit nearly flush with the rear fenders. You may have tire rub under suspension compression so some fender modifications may be needed.
Last edited:
Thank you sir :beer:
Glad we could help! Thank you for your patience.
Thank you for the info!!
Bringing this back from the dead, so apologies, will 19x11 with +15mm offset fit as well on the rear without any poking outside of the fenders?
Debating between F:18x8.5 +20mm/R:18x11 +20mm OR F:19x10 +15mm/R:19x11 +15mm
Deciding factors include; tire size/fitment (want 275s front and at least 305s preferably 335s rear) and flushness on my Cobra because I don't want any poke past the fenders/qtrs
Debating between F:18x8.5 +20mm/R:18x11 +20mm OR F:19x10 +15mm/R:19x11 +15mm
Deciding factors include; tire size/fitment (want 275s front and at least 305s preferably 335s rear) and flushness on my Cobra because I don't want any poke past the fenders/qtrs
Last edited:
The 19" combination is too aggressive both front and rear and will stick out past the fenders. The 18" combination will work but the max tire width you'll be able to run in the rear is 305. You'll also need to run a slightly narrower tire in the front as the 275/35-18 size is too wide for an 8.5" wide wheel. 9 inches is the minimum.
can't i roll my fenders and run 335s?
Can i run 19x10 +35mm on the fronts?
i never seen somebody run a flush Cobra on 19's and i want to be a game changer but dont want to be stuck with wheels that dont fit, and i would really like the 19's to work with nothing more than rolled fenders
Can i run 19x10 +35mm on the fronts?
i never seen somebody run a flush Cobra on 19's and i want to be a game changer but dont want to be stuck with wheels that dont fit, and i would really like the 19's to work with nothing more than rolled fenders
Last edited:
The 19" wheel dimensions you have listed are outside of our fitment guide. I see you have a Discount Tire location in your city. My suggestion is to set up an appointment with this store so they can do some measurements on your vehicle. They may even be able to test fit a few different applications.
I did a search on-line and ran across this fitment (linked below). I'm skeptical about the front set-up though as the listed offset is exceptionally high and would likely rub suspension components.
RIMTUCK.com - Setup
ok thanks very much for the help
ok well my two options are;
F: 18x9.5 +20mm/R: 18x11 +20mm
F: 19x10 +35mm/R: 19x11 +15mm
Both setups with F:275s/R:335s with rolled fenders, ill take it down to my local DTD and have them assess it. Thanks again
F: 18x9.5 +20mm/R: 18x11 +20mm
F: 19x10 +35mm/R: 19x11 +15mm
Both setups with F:275s/R:335s with rolled fenders, ill take it down to my local DTD and have them assess it. Thanks again
Thank you for keeping us posted here. Let us know how everything goes.
Well went to my local DTD and they helped me out a lot thanks again Nannie its time to save $$$
Awesome! We appreciate your support!
Users who are viewing this thread
