UP FOR SALE IS ONE BAD ASS TERMINATOR ENGINE, THIS IS WHAT YOU NEED TO HOLD BIG #'S FOR MORE THAN A FEW PASSES AT THE TRACK.
THE ENGINE IS OUT OF MY 03 COBRA, I WAS RUNNING A 2.8 KB AND WANTED TO MAKE MORE POWER, SO WHAT DO YA DO? YES THATS RIGHT SPEND AN ASS LOAD OF CASH AND WAIT ABOUT SIX MONTHS.
BASICALLY THE MOTOR IS BRAND NEW, IT HAS NEVER BEEN INSTALLED, I GOT TIRED OF WAITING, LOST INTEREST IN THE CAR AND BOUGHT A STOCK MOTOR AND SOLD IT, NOW I HAVE HAD THE BEAST SITTING ON MY ENGINE STAND AND IT NEEDS A NEW HOME.
EVERYTHING THAT WAS DONE CAN BE VERIFIED WITH PAPER WORK FOR EVERYTHING, HERE IS WHAT I HAD DONE;
DEPENDING ON WHAT YOU STARTED WITH, i AM ALSO INCLUDING THE BLOWER INTAKE AND INTERCOOLER, THE ACCESORY BRACKET WITH THE 100 MM PULLEYS ON IT, THE CRANK PULLY WITH THE METCO ADJUSTABLE LOWER PULLEY (THREE DIFFERENT RINGS INCLUDED) FORD GT COIL COVERS. ALSO INCLUDED, THE COMPLETE ENGINE HARNESS WITH ECU
THE BLOWER IS NOT INCLUDED352 494 6913
SHIPPING WILL VARY BETWEEN $350 - $650 DEPENDING ON WHERE IT IS GOING
THE ENGINE IS OUT OF MY 03 COBRA, I WAS RUNNING A 2.8 KB AND WANTED TO MAKE MORE POWER, SO WHAT DO YA DO? YES THATS RIGHT SPEND AN ASS LOAD OF CASH AND WAIT ABOUT SIX MONTHS.
BASICALLY THE MOTOR IS BRAND NEW, IT HAS NEVER BEEN INSTALLED, I GOT TIRED OF WAITING, LOST INTEREST IN THE CAR AND BOUGHT A STOCK MOTOR AND SOLD IT, NOW I HAVE HAD THE BEAST SITTING ON MY ENGINE STAND AND IT NEEDS A NEW HOME.
EVERYTHING THAT WAS DONE CAN BE VERIFIED WITH PAPER WORK FOR EVERYTHING, HERE IS WHAT I HAD DONE;
- NEW KELLOG STEEL CRANK $700.00
[*]NEW BILLET I BEAM MANELY RODS (NOT TO BE CONFUSED WITH THE FACTORY CAST H BEAM) THEY WERE $1,900.00 !
[*].010 OVER JE PISTONS , 8:5-1 COATED SKIRTS AND DECKS $1,500.00
[*]ARP 2000 SERIES MAIN STUDS AND HEAD STUDS
[*]COMETIC MLS HEAD GASKETS
[*]NEW OIL PUMP
[*]NEW FORD GT CAMS
[*]NEW COMP CAMS VALVE SPRINGS
[*]COMPETITION HEAD PORTING BY CHRIS STARNES $1,500
[*]THE BLOCK WAS CHECKED AT THE MACHINE SHOP;
[*]BHJ BORED WITH TOURQE PLATE
[*]SQUARE DECKED AND TRUED
[*]POLISHED CRANK
[*]BLANCED ROTATING ASSEMBLY
DEPENDING ON WHAT YOU STARTED WITH, i AM ALSO INCLUDING THE BLOWER INTAKE AND INTERCOOLER, THE ACCESORY BRACKET WITH THE 100 MM PULLEYS ON IT, THE CRANK PULLY WITH THE METCO ADJUSTABLE LOWER PULLEY (THREE DIFFERENT RINGS INCLUDED) FORD GT COIL COVERS. ALSO INCLUDED, THE COMPLETE ENGINE HARNESS WITH ECU
THE BLOWER IS NOT INCLUDED352 494 6913
SHIPPING WILL VARY BETWEEN $350 - $650 DEPENDING ON WHERE IT IS GOING
