Im going whipple very soon.So im going to do a dfx and a steel flywheel.How much power will the 10 spline hold?im guessing im going to make 600 to 640whp on 17 to 19psi and i will never go past that as this is my daily driver street car.Also there will be no wheel hop issues as im swapping in a solid axle.
mods will be
whpple 2.3
60lbs injectors
95mass
jlt fender mount intake
2.5 off road x pipe with dynomax mufflers and flow tubes
3.55 solid axle 8.8 with adjustable control arms full length sub frames
then the dfx clutch.
shooting for 600 to 640whp
Will the 10 spline live?
Thanks
Also going to do the head tick repair on the driver head while i have the tranny out.
mods will be
whpple 2.3
60lbs injectors
95mass
jlt fender mount intake
2.5 off road x pipe with dynomax mufflers and flow tubes
3.55 solid axle 8.8 with adjustable control arms full length sub frames
then the dfx clutch.
shooting for 600 to 640whp
Will the 10 spline live?
Thanks
Also going to do the head tick repair on the driver head while i have the tranny out.