1/8 mile et anybody convert to 1/4

[onesickcobra]

got a ? my car has ran a best of 7.04 at 101.7 with a 1.56 60 ft. can anybody tell me what it mite run in the quarter. and also what it the fastest 6spd eaton and bolt ons time. no nos

 

[cobra_matt]

Should run 10.9 - 11.0s. Not sure what the trap would be.

 

[MustangMikeKy]

11.0 usually, but at 101, you prob would have went a 10.8x

 

[IronTerp]

Based on my car, I'd estimate 10.90's at 128-130 MPH. Fastest 6 speed, no nos Eaton is F8LSNAKE's 10.34 @ 132.00 w/ 1.49 (6spd/SRA)..........Tough record to catch.

 

[latemodelracer2]

usually 1.56-1.57 x the 1/8 mile time will get close to the 1/4

 

[AaronK]

Check out this site Wallace Racing - Automotive Calculators

I wouldn't trust it 100% but it might give you an idea of were you should be.

 

[c6zhombre]

usually 1.56-1.57 x the 1/8 mile time will get close to the 1/4

+1.

at least will get you in the ballpark

 

[onesickcobra]

thanks guys now what do i need to do to go 10.30s im full weight sra with 3.73 stage 4 eaton 2.93 upper 4# lower mac cai with 90 mm maf stock plemnum and tb 3 inch x and dynomax with dumps

 

[IronTerp]

thanks guys now what do i need to do to go 10.30s im full weight sra with 3.73 stage 4 eaton 2.93 upper 4# lower mac cai with 90 mm maf stock plemnum and tb 3 inch x and dynomax with dumps

Nice setup. Hit a 1/4 mile strip and I'm sure you'll have the next 10 second Eaton. What's your wheel/tire setup for the track?

 

[rw95gt]

well that et time sure does look a lot like mine. lol. im in the same boat man. i ran a 7.02 at 101. i think i should run a low 10.90 at 128 or so. i would guess the same for you. i ran a 11.12 in the 1/4 with a 7.20 1/8 at 100 mph. so if i can match my 7.02 run i should run a 10.94 or faster i think. looks like the list is going to get longer over the weekend maybe 2 lists if i spray my car.

 

[MustangMikeKy]

thanks guys now what do i need to do to go 10.30s im full weight sra with 3.73 stage 4 eaton 2.93 upper 4# lower mac cai with 90 mm maf stock plemnum and tb 3 inch x and dynomax with dumps

100-150 shot

:beer:

 

[onesickcobra]

im run factorty cobra wheels with 275 40 17 dr mickys. any weight i can dump with out the visual effect. o ran the caron my street tires dnt no if this is good or not but it went 7.83 with sum traction issues as one might expect lol. i run a true radial class and need to get it into the 7.6s in that class also

 

[onesickcobra]

where can i put my cobra on a diet

 

[SVTburnout]

back seat, ac, power everything, passenger seat, carpet, battery relocate, theres all sorts of things

 

[IronTerp]

im run factorty cobra wheels with 275 40 17 dr mickys. any weight i can dump with out the visual effect. o ran the caron my street tires dnt no if this is good or not but it went 7.83 with sum traction issues as one might expect lol. i run a true radial class and need to get it into the 7.6s in that class also

Well, I have to hand it to you: Your 1.56 60' time on MT drag radials with a no-nos Eaton setup is perhaps the best in Terminator history. Excellent! What's your launch technique?

 

[Black Sex]

Try this one http://www.geocities.com/allstangs/Page.htm

its a good chart

 

[onesickcobra]

i just do a good burnout 18psi in them stage and bring the rpms up to 45 t0 5 and ever so slightly slip the cluth just so u dnt have that hard jerk from a clutch dump