09 to 13 clutch

[snowball6405]

Have a good deal on 13 oem clutch with flywheel. My car is an 09 if i buy a 10 or newer slave cylinder will that clutch work? Thanks

 

[hotford]

07-09 shelby are the same,8" double disc
2010-2012 are the same.8.5 double disc
2013-2014 are 10" double disc .....
2010 and up flywheels are the same....
2013-2014 clutch set up will require the larger slave

2013-2014 are by far the the best the factory has devloped....better than any Spec aftermarket.

 

[snowball6405]

Hey i appreciate the info thanks

 

[snowball6405]

I was told i need new slave even for a 10 clutch

 

[hotford]

Yes 10-12 are the same
07-09 are the same
12-13 are the same

hope this helps............

I was told i need new slave even for a 10 clutch

 

[SilverGTvert]

So the larger 13/14 clutch will work on the earlier models with only a slave upgrade?

 

[snowball6405]

Yes from my research 13-14 will work. U need a 10 or newer flywheel and slave. U can get clutch 415 flywheel 180 and slave 180 all brand new

 

[shelby2]

Yes, when Ford did my clutch TSB up-grade they placed a 2012 clutch in my 09 and used the different slave cylinder, I however thought it was to soft and decided a couple weeks later to get the McLeod RXT. Then I needed to get a 2009 Slave Cylinder.:fm:

Mark

 

[snowball6405]

U still have other slave?

 

[shelby2]

I actually have everything except that, traded it for the 2009 slave cylinder with my speed shop.
Mark