I bought the car used with 2,900 miles on it. The car currently has 4,992 miles on it. It has always been garaged under the car cover, I took it to the track once and made 3 passes (only one was a full pass due to the track conditions) The car is excellent condition and only on dyno to get tuned. Every time the car was driven it was washed and put back under the cover.
746 rwhp/679 tq SAE on a Dynojet with 3.0" pulley and 91 octane! It was tuned at Dynojet in Las Vegas Nv. By Carl Chastain
The good stuff:
+ Polished Whipple 2.9L Supercharger
+ 72 lb injectors
+ L&M 66mm Throttle body
+ NGK TR6 plugs
+ SCT Xcalibrator Tuner
+ C&R/Shelby HE w/ fans
+ KB dual BAP
+ Reische 170* thermostat
+ Dynatech 1-7/8" longtube headers and hi-flow x-pipe
+ MMS/MAC axle back mufflers
+ MGW shifter w/ Rally ball Cobra
+ Dynotech 900HP aluminum driveshaft
+ BMR driveshaft safety loop - red
+ FRPP springs
+ BMR boxed lower control arms - red
+ BMR Control arm relocation brackets - red
+ BMR Adjustable panhard rod w/ poly bushings - red
+ BMR Solid rear 22mm swaybar - red
+ Stillen front and rear drilled/slotted rotors
+ Hawk HPS street brake pads
+ OEM 18" wheels black powder coated with 305 Nitto DR's on rear
+ Shelby Kicker stereo system - complete
+ Shelby signed plaque
+ Shelby Carbon Fiber Mirror Covers
+ Moroso Coolant expansion tank
+ Moroso Intercooler reservoir tank
+ Shelby Billet Engine bay cap set
+ Shelby Billet fuse box cover
+ Steeda Billet battery hold-down
+ Steeda Billet strut nut covers
+ Redline Tuning Elite hood struts
+ JLT Hood Vents (Hydro Carbon)
+ JLT Radiator support cover - Painted to match car
Almost $16,000 in parts alone I have every receipt. I have all the OEM parts in the boxes the aftermarket parts came in with the mileage written on the box when the parts were removed.
Please PM or email me if you have any questions or want more pictures.
EMAIL: [email protected]
Thanks
Steve
I am asking $41K OBO. I know this is a tough market there is room in the price to wiggle. SOLD!!!
Pictures
Link to more pictures2009 Gt500 Photos by ramair96ws6_2006 | Photobucket
Dyno
746 rwhp/679 tq SAE on a Dynojet with 3.0" pulley and 91 octane! It was tuned at Dynojet in Las Vegas Nv. By Carl Chastain
The good stuff:
+ Polished Whipple 2.9L Supercharger
+ 72 lb injectors
+ L&M 66mm Throttle body
+ NGK TR6 plugs
+ SCT Xcalibrator Tuner
+ C&R/Shelby HE w/ fans
+ KB dual BAP
+ Reische 170* thermostat
+ Dynatech 1-7/8" longtube headers and hi-flow x-pipe
+ MMS/MAC axle back mufflers
+ MGW shifter w/ Rally ball Cobra
+ Dynotech 900HP aluminum driveshaft
+ BMR driveshaft safety loop - red
+ FRPP springs
+ BMR boxed lower control arms - red
+ BMR Control arm relocation brackets - red
+ BMR Adjustable panhard rod w/ poly bushings - red
+ BMR Solid rear 22mm swaybar - red
+ Stillen front and rear drilled/slotted rotors
+ Hawk HPS street brake pads
+ OEM 18" wheels black powder coated with 305 Nitto DR's on rear
+ Shelby Kicker stereo system - complete
+ Shelby signed plaque
+ Shelby Carbon Fiber Mirror Covers
+ Moroso Coolant expansion tank
+ Moroso Intercooler reservoir tank
+ Shelby Billet Engine bay cap set
+ Shelby Billet fuse box cover
+ Steeda Billet battery hold-down
+ Steeda Billet strut nut covers
+ Redline Tuning Elite hood struts
+ JLT Hood Vents (Hydro Carbon)
+ JLT Radiator support cover - Painted to match car
Almost $16,000 in parts alone I have every receipt. I have all the OEM parts in the boxes the aftermarket parts came in with the mileage written on the box when the parts were removed.
Please PM or email me if you have any questions or want more pictures.
EMAIL: [email protected]
Thanks
Steve
I am asking $41K OBO. I know this is a tough market there is room in the price to wiggle. SOLD!!!
Pictures
Link to more pictures2009 Gt500 Photos by ramair96ws6_2006 | Photobucket
Dyno
Last edited: