I had these questions posted on Terminator Talk but maybe this would be a better spot.
I have installed an '04 IRS into a '67 coupe. The brakes were missing so I have had to put some stuff together. I also put some Cobra calipers on front. I bought some Russell flex lines for both front and rear. I am using 3/16 hardline from the master cylinder.
1. What are the fittings on both front and rear flex lines where they meet the hard lines? The rear looks like it might be a 37 degree fitting but is it metric or SAE and what size is it?
2. The front looks like it is a 45 degree double flare. Is this metric or SAE and what size?
3. What size are the banjo bolts on the caliper connection? Is 10mmX27mm correct
Any help would be appreciated?
I have installed an '04 IRS into a '67 coupe. The brakes were missing so I have had to put some stuff together. I also put some Cobra calipers on front. I bought some Russell flex lines for both front and rear. I am using 3/16 hardline from the master cylinder.
1. What are the fittings on both front and rear flex lines where they meet the hard lines? The rear looks like it might be a 37 degree fitting but is it metric or SAE and what size is it?
2. The front looks like it is a 45 degree double flare. Is this metric or SAE and what size?
3. What size are the banjo bolts on the caliper connection? Is 10mmX27mm correct
Any help would be appreciated?
