I've tried the search and couldn't find anything. I'm wanting to use the 03 cluster in my 99' with a procharger. My question is being that the 03 cluster doesn't read vacuum where do your boost source? I was thinking about tapping into the idle air servo inlet or the side of the throttle body. I don't want to tap into my discharge tube because i've already powder coated it and trying to keep it clean.
03 guage cluster "boost"
- Thread starter fst86410
- Start date
Just tap into one of the vacuum lines running on the back of the motor. It shouldn't hurt the gauge if it sees vacuum. Although you might want to check with the termi guys to see if there is some kind of check valve in line with the boost gauge.
Last edited:
GoatSlayer
Banned
Use a T-fitting and tap into one of your vacuum lines and you should be ok.
As said above....Any one of the lines off of your intake will work.
Users who are viewing this thread
