03 Cobra Turbo Vaccum line help (Sullivan)

[SVTChris10]

I have these lines from when I removed the blower. I dont know what to keep and/or remove. It started with these 3 lines.

I removed the small tee on the right and ran it straight into the other tee (middle) Figured it would be reading the same source in the same vac line. Looks like this now.

Now with my Sullivan Upper and Lower Intake it has two vac/boost ports on the side.

I should have a vac line from by BOV going into one, and im guessing this line goes into the other?

 

[Fat-cat]

The main boost feed that goes to your regulator needs to go to the manifold. As does the last line in the picture. The one that is U shaped can be plugged as i think it went to the charcoal canister for the fuel system.

Its hard to say for sure my lines were all gutted and re-ran with a dis block on the firewall. I have 2 Feeds coming off my Upper one for Boost and one to the BOV