03 Cobra Swap In A 88 LX- What Wiring On DriverSide

[Josh93]

Just wondering what I do with the wiring coming through the driver side of the firewall going to the gauge cluster, light switch, all the way throughout the car? Do I pull it all or what?
Thanks

 

[KWClutch]

I did a swap into a 98 Cobra and if I had to do it over again I would tear out all the wiring and get a donor car and swap all wiring. It was a huge pain in the ass to try to wire up the existing stuff to the new stuff.

 

[Josh93]

What about some plugs being different on that wiring harness?

 

[KWClutch]

Most plugs just have a positive and a negative. You can cut the 03 plug out and just wire in the old plug.

 

[Josh93]

Most plugs just have a positive and a negative. You can cut the 03 plug out and just wire in the old plug.

Alright, that's what I was thinking. So even the body wiring for like the door jamb switch? I also pull all those wires too goin to the back of the car?

 

[Josh93]

What about the ignition switch and such. I'm keeping my dash and steering column from the fox body

 

[Josh93]

Anyone?