'03 Cobra AODE, Solid 1st Track Times

[HRSEPLA]

Just got my 03 together, it has a 2.93 w/ idlers, K&N, flowmasters, SCT tuner, 8.8 w/ 3.73's, AODE, M/T Drag Radials, and a full tank of gas.

I brought the revs up to about 2000 on the footbrake and it flashed to about 4000.
The I had the Baumann Box set to shift at 6200.

60-1.638
330-4.814
1/8-7.455
MPH-92.99
1000-9.748
1/4-11.685
MPH-116.85

Thanks for all your help on this site guys, I am very happy!

 

[Skywarp]

Just got my 03 together, it has a 2.93 w/ idlers, K&N, flowmasters, SCT tuner, 8.8 w/ 3.73's, AODE, M/T Drag Radials, and a full tank of gas.

I brought the revs up to about 2000 on the footbrake and it flashed to about 4000.
The I had the Baumann Box set to shift at 6200.

60-1.638
330-4.814
1/8-7.455
MPH-92.99
1000-9.748
1/4-11.685
MPH-116.85

Thanks for all your help on this site guys, I am very happy!

AODE stands for auto right? What did that install run you if you don't mind me asking?

 

[HRSEPLA]

Yep it is an Auto,
I did all the labor myself, and got the trans from TSI in Addison, IL. I used a PI Stallion converter (No lock up under power, I only have the single disk lockup), the Baumann Transmission controller, and all the Misc.
I think in parts I have $4000 or so.
My wife hurt her back bad enough where she could not drive stick anymore, so this was our only option, and I actually love it!

 

[REPCobra10]

That looks like a pretty good run there man. After my automatic install in my '04 Cobra, my first trip to the track netted an 11.46-second 1/4 mile ET @ 119.56 mph with a 1.59 60' on Mickey Thompson ET Street Drag Radials. My 1/8 mile was 7.30 @ 95 mph. That run was with a ported eaton, 2.76" upper only, air intake, cat-back, and tune. My automatic has a full-manual valve body and uses a non-lockup torque converter with a 2,800 RPM stall. I leave the same way as you, at 2,000 RPM's, and just stand on it right out of the hole. It ran me around $4,000 as well after all was said and done. Anyways, I'm selling mine now and going back to 6-speed shortly, but it was a hell of a blast to be sure. Well, good luck with your Cobra in the future man. Take it easy.

 

[FordRacing200]

did you use a AODE or a 4R70W? I don't care for auto cobras, i'd never convert it, but i understand you're situation and they are much more consistent with an auto...Good Luck

-Doug

 

[no_slow_svt]

where are you racing? GLD?
nice times
J

 

[HRSEPLA]

I use an AODE, I liked the gearset better for my car,
I was at GLD, with the Milwaukee crew, which car was yours? I met alot of Greg's friends from MMA there, it was awesome weather out! I raced Greg on my last run.
Thanks guys! Sam