Hillsborough, NJ
I am putting up for sale a COMPLETE 4V 4.6motor. The motor has about 1500 miles on it and just had a complete fresh up job and valves adjusted from a highly reputable engine shop in PA. This engine put down 700Hp/600Tq at the wheels, revs to 7200Rpm on 93 pump gas. (Decided to build a Coyote / turbo / auto trans setup)
Engine was completely torn down at 18k original miles and had the following upgrades-
Engine – Built by Big Daddy Performance, Lakewood NJ
Custom Manley 2618 forged piston w/ HD wrist pins
H-beam rods
AP steel file fit rings
ARP main studs with full tray
ARP main side bolts
TSS Billet gear HV HP oil pump w/pickup
Cometic head gaskets
HP main bearings
HP Rod bearings
FRPP timing chain kit
ATI balancer
Metco lower pulley kit
Balanced and blueprint polished crank
60# injectors
Reische 170 thermostat
Cylinder cooling mod
Heads
TEA ported 4v heads w/ Ferrea stainless valves / Valve springs
Titanium retainers
Custom blower cams
Adjustable cam gears
Whipple 2.9 supercharger
Gates Fleet Runner supercharger belt
Kooks 1 3/4 long tube headers with x-pipe and cats
Custom fuel system
Dual 340Lph fuel pumps
Teflon lined fuel lines #10 Feed #8 return
Black anodized fuel rails and fittings
Aeromotive Pro EFI regulator
MIL Eliminators
EGR delete Kit
NGK plugs
Paid $17900
Serious inquires only -
Conservative tune on 93 pump. Easy to make 800Hp+ with race gas. Motor built to 1000Hp.
PM me for contact info.
I am putting up for sale a COMPLETE 4V 4.6motor. The motor has about 1500 miles on it and just had a complete fresh up job and valves adjusted from a highly reputable engine shop in PA. This engine put down 700Hp/600Tq at the wheels, revs to 7200Rpm on 93 pump gas. (Decided to build a Coyote / turbo / auto trans setup)
Engine was completely torn down at 18k original miles and had the following upgrades-
Engine – Built by Big Daddy Performance, Lakewood NJ
Custom Manley 2618 forged piston w/ HD wrist pins
H-beam rods
AP steel file fit rings
ARP main studs with full tray
ARP main side bolts
TSS Billet gear HV HP oil pump w/pickup
Cometic head gaskets
HP main bearings
HP Rod bearings
FRPP timing chain kit
ATI balancer
Metco lower pulley kit
Balanced and blueprint polished crank
60# injectors
Reische 170 thermostat
Cylinder cooling mod
Heads
TEA ported 4v heads w/ Ferrea stainless valves / Valve springs
Titanium retainers
Custom blower cams
Adjustable cam gears
Whipple 2.9 supercharger
Gates Fleet Runner supercharger belt
Kooks 1 3/4 long tube headers with x-pipe and cats
Custom fuel system
Dual 340Lph fuel pumps
Teflon lined fuel lines #10 Feed #8 return
Black anodized fuel rails and fittings
Aeromotive Pro EFI regulator
MIL Eliminators
EGR delete Kit
NGK plugs
Paid $17900
Serious inquires only -
Conservative tune on 93 pump. Easy to make 800Hp+ with race gas. Motor built to 1000Hp.
PM me for contact info.