03 Blk 600hp Cobra, CCWs, 28k miles, fully built
sold
Im looking to sell my Black 03 Cobra, the car has 28k original miles on it. It was recently just built in Memphis, Tn at Dynospeed Racing. It has a brand new MMR stroker engine and was dynoed at 598rwhp/545 torque on 15lbs of boost. The build has 1500 miles on it. Car has never been driven in the rain and always garage kept. Extremely clean inside and out. I may take a partial or even trade on a newer low mileage Cummins or Duramax only! Im not on here everyday so for questions call or txt me at 731-433-9030. Thanks :rockon:
Engine
MMR 5.0 Stroker
-18cc forged Manley pistons
Manley h-beam rods
ARP mainstuds, headstuds, and rod bolts
BB&T did Valve job, new seals, guides, and springs and decked heads .001
2.2 Kenne Bell Blower (3.5 upper pulley)
Accufab/KB Throttle Body
60lb Simmens injectors
KB boost-a-pump
Metco lower pulley kit(4lbs lower)
Billet flow 4 piece idler kit
JLT CAI
JLT Catch Can(black anodized)
PLX wideband systems
Autometer boost, water temp., and oil pressure guages
Raptor shift light
Optima Red Top battery
Cooling
LFP heat exchanger
LDC head cooling mod
Lethal Performance oversized tanks (powdercoated black)
Driveline
New Spec 3 clutch
Spec steel flywheel
Billet throwout bearing retainer
Liberty 26 spline input shaft
Billetflow IRS brace
MM IRS poly bushings
MM subframe connects
Exhaust
Bassani Mid-length Headers
Bassani off road x-pipe
Magnaflow Catless exhaust
Suspension/Wheel and Tire
Tociko struts
Saleen front springs
Racing springs in rear with airbags
CCW 505a rims 18x9.5/18x11
275/35-18 Nitto 555(front)
315/30-18 MT DRs(rear)
Wheels and tires have less than 2000 miles
MM caster camber plates
Baer drilled/slotted rotors
Wagner Thermaquiet brake pads
There are close ups and more shots in the rest of the album here: http://photobucket.com/svtcobra
Video Added of the dyno, just click on the pic.
sold
Im looking to sell my Black 03 Cobra, the car has 28k original miles on it. It was recently just built in Memphis, Tn at Dynospeed Racing. It has a brand new MMR stroker engine and was dynoed at 598rwhp/545 torque on 15lbs of boost. The build has 1500 miles on it. Car has never been driven in the rain and always garage kept. Extremely clean inside and out. I may take a partial or even trade on a newer low mileage Cummins or Duramax only! Im not on here everyday so for questions call or txt me at 731-433-9030. Thanks :rockon:
Engine
MMR 5.0 Stroker
-18cc forged Manley pistons
Manley h-beam rods
ARP mainstuds, headstuds, and rod bolts
BB&T did Valve job, new seals, guides, and springs and decked heads .001
2.2 Kenne Bell Blower (3.5 upper pulley)
Accufab/KB Throttle Body
60lb Simmens injectors
KB boost-a-pump
Metco lower pulley kit(4lbs lower)
Billet flow 4 piece idler kit
JLT CAI
JLT Catch Can(black anodized)
PLX wideband systems
Autometer boost, water temp., and oil pressure guages
Raptor shift light
Optima Red Top battery
Cooling
LFP heat exchanger
LDC head cooling mod
Lethal Performance oversized tanks (powdercoated black)
Driveline
New Spec 3 clutch
Spec steel flywheel
Billet throwout bearing retainer
Liberty 26 spline input shaft
Billetflow IRS brace
MM IRS poly bushings
MM subframe connects
Exhaust
Bassani Mid-length Headers
Bassani off road x-pipe
Magnaflow Catless exhaust
Suspension/Wheel and Tire
Tociko struts
Saleen front springs
Racing springs in rear with airbags
CCW 505a rims 18x9.5/18x11
275/35-18 Nitto 555(front)
315/30-18 MT DRs(rear)
Wheels and tires have less than 2000 miles
MM caster camber plates
Baer drilled/slotted rotors
Wagner Thermaquiet brake pads
There are close ups and more shots in the rest of the album here: http://photobucket.com/svtcobra
Video Added of the dyno, just click on the pic.
Last edited:
