03-04 Cobra specific nitrous kit

[BlownAway03]

N.O.S. kit w/many accesories
I have a 03-04 specific nitrous kit for sale. It will come with many accessories and all the instructions and wiring. The following are included:
*N.O.S. 03-04 wet plate kit (nitrous plate installs between blower and tb plenum)
*Dynotune rpm activated window switch
*N.O.S. purge kit
*Dynotune bottle heater (pressure controlled)

This will come with everything needed to run nitrous on a terminator. I'm available to answer any questions. I'm asking $650 OBO.

[/IMG]

[/IMG]

[/IMG]

[/IMG]

 

[BlownAway03]

What do I need to do to get this kit sold?:shrug:

 

[x NOODLES x]

Its a good price.

Be Patient. :beer:

 

[03snakeminated]

how much hp you made with this kit and what size pill??

 

[BlownAway03]

I put down 604hp and 694 lb/ft with a low timing tune and 100 shot pills and 15 psi out the Eaton. I could have made a lot more but I wanted to be on the safe side. This was also on a Mustang dyno.

 

[Nastystang]

What supporting mods did you need to make this work please pm me im interested

 

[95blowncobra]

good price man! very fair

 

[864svt]

im interested aswell, would i need injectors, bap??

 

[BlownAway03]

im interested aswell, would i need injectors, bap??

I didn't need injectors. Some tuners told me I would need a BAP and some say I wouldn't so I added one for good measure. My car had plenty of fuel on the dyno with the BAP installed.

 

[03snakeminated]

wondering if it needs to be ported (plate) to match my ported t/b and plenum

 

[BlownAway03]

No. I have a ported tb and plenum also. The plate doesn't interfere.

 

[Nastystang]

So what if im not ported tb and pl??

 

[BlownAway03]

It doesn't matter. This kit works with any throttle body setup as long as you still have the Eaton.

 

[03snakeminated]

if i decide to ugrade to a twin screw down the road can i still use this kit with like a small 50-shot??

 

[BlownAway03]

if i decide to ugrade to a twin screw down the road can i still use this kit with like a small 50-shot??

You would have to spray into the intake tube because the nitrous plate that comes with this kit bolts between the stock throttle body plenum and the Eaton. Since the twin screw blowers plenums are not bolted on that eliminates the nitrous plate.

 

[4-v mach]

i wonder if this plate will fit the lightning ???

 

[BlownAway03]

i wonder if this plate will fit the lightning ???

I don't think so.

 

[BlownAway03]

ttt

 

[SVT GI]

Is the bottle and the line from the bottle to the solenoids included?

 

[BlownAway03]

Is the bottle and the line from the bottle to the solenoids included?

yes