Ok we all know that the directions say to disregard this part but I did not like that! I change exhaust from time to time & would like my 02 sensor plugs to be stationary so I can pull them apart while I'm on my back under the car.All you have to do is cut the bracket off just before both mounting tabs.After this the right side will bolt right up like normal.The left side you will turn upside down & move it down one bolt this puts is in the exact location of stock! Also when doing this cooling mod make sure you have clearance between the EGR tube & bell housing. One last thing pressurize the system before installing the transmission!! I found it easy by putting 15 Lbs of nitrogen in the crossover plug with refrigerating gauges & letting it sit for 1/2 hour.
