Does anyone know the Russell part # for speed bleeders? Thanks Brian
Jun 15, 2005 #1 G Gastrader1 New Member Established Member Joined Aug 15, 2002 Messages 121 Location Pittsburgh, PA Does anyone know the Russell part # for speed bleeders? Thanks Brian
Jun 16, 2005 #2 A Andy M Active Member Established Member Joined Aug 14, 2001 Messages 2,447 Location Northwest Houston send a PM to 03Cobratoy on this board. he has the '00 R Brembo kit on his '03 Cobra and has also installed the speedbleeders.
send a PM to 03Cobratoy on this board. he has the '00 R Brembo kit on his '03 Cobra and has also installed the speedbleeders.
Jun 16, 2005 #3 MidLifeC PCa Survivor Established Member Joined Oct 12, 2002 Messages 1,950 Location Livonia, MI I used the ones from speedbleeder.com - same as 2003 Cobra PBR's.
Jun 16, 2005 #4 toofast4u Versatilist Established Member Joined Jun 22, 2002 Messages 4,650 Location Atlanta, GA I believe I have the Speedbleeders SB1010S in mine remember you need 4 for the front.
Jun 16, 2005 #5 '03 Sonic Blue "So blue you can hear it" Established Member Joined Feb 28, 2003 Messages 669 Location Eastern Iowa, where the river runs west I got mine at O'Reilly. M10x1 I think. I threw the packaging away, so I don't have the numbers. I just took the existing bleeder screw in and matched the threads and length to the ones they had in stock. --Mike
I got mine at O'Reilly. M10x1 I think. I threw the packaging away, so I don't have the numbers. I just took the existing bleeder screw in and matched the threads and length to the ones they had in stock. --Mike
Jun 16, 2005 #6 ShelbyGuy Steers With the Throttle Established Member Joined Jun 10, 2003 Messages 9,300 Location Eating a steady diet of government cheese, and liv remember to keep an eye on the master cylinder. the brembos are thirsty.