i just rebuilt and installed my new motor last night and have a few questions. my build consists on stock displacement with flattop pistons and stainless rings. when i started it up for the first time it seemed like it didnt fire right away. also it cranks kinda slow is that due to the increased...
wtb manley billet i beam rods stock length
i am looking to buy a set of billet i beam rods either oliver or manley prefer manley because there a little cheaper. im in the process of building up my short block and am looking for a set thats either slightly used or new. need stock stroke btw if...
i am trying to chase down this embarrassing tick that my car is doing. it started a few months ago and hasnt gotten any better or any worse. i still hammer on it and it hasent gotten any worse. ive replaced the lifters on both sides and changed the oil and it hasnt fixed it. it sounds like its...
i have an 03 cobra with newish 9 thread heads on. its making a ticking sound under the valve cover but i cant tell which side its coming from and it sounds like a lifer but i replaced all the passenger side with new ones and put used ones from my other heads on the driver side that were good. it...
i have a set of complete cobra cylinder heads that i just got back from the machine shop. they are the late 03 early 04 heads with the 9 thread spark plug holes. they were surfaced, had the valves ground and new stem seals and freeze plugs. they will come with cams, lifters, valves, springs, and...
i have a set of 04 4v heads that need the cam journals line honed because the cams are tight with the cams torqued down. these cams cam out of my other heads and i was wondering if anyone else had this problem and knows of a good shop that will line hone the cam journals. i know it can be done...
i have a set of brand new fore fuel rails for any 96-04 2v. they have a little bit of thread sealant on them from the previous owner intalled the fittings but they are brand new. im looking to get 225 shipped. send me your number or a pm for pics. 760-518-6231
i am looking to maybe sell my polished kenne bell 2.6h. it has maybe 10000 miles on it and has no damage at all too it. its still on the car and if it doesnt sell ill just keep it but looking to get at least 2800 for it. for pics text send me your email thanks
wtt/for sale polished 2.6
i have a polished kb 2.6h on my car right now with about 7000 miles and want to trade up to a 2.8 preferably polished. let me know what you got would be willing to put a little money my way also. pm or text 760-518-6231
i would also sell for the right price also...
looking to pick up a set of bosch 105 injectors for cheap because it seems my tuner wants me to run 105s for e85 and 700+whp. let me know what you got you can pm or text me at 760-518-6231
im going to change my fuel system to full return pretty soon and was wondering if i can make 700+ with my 2.6 longtubes and supporting mods with 100 octane or if im going to have to go e85? if i have to i can maybe trade for a 2.8 but i dont really want to switch to like a 2.9 because i dont...
i went to do a burnout in 2nd gear and took off and the clutch slipped and then grabbed and the wheels spun then went to 3rd and it wouldnt go in 3rd or any gear at that with the clutch in. have to rev match each gear to even drive it. i have a spec stage 3+ and it only has like 2500 miles on...
my cooling fan comes on really early and it stays on. also what is that little green sensor the goes into the fan shroud? im afraid its gonna kill my alternator and prematurely wear out the fan motor. anyone else have this problem?
i just installed new heads on my 03 and the car runs fine in open loop i.e if i give the car more then a 1/4 throttle but under light loads and idling it will surge and run like shit when its in closed loop. it feels like a vacuum leak but i cant tell because sometimes it idles fine and other...
i have a used pair of 03 heads at the machine shop right now and they said that the heads cant be fixed because the cam towers are warped and the cams dont turn. my question is does anyone know if i can have them line hone it and put a repair sleeve in the towers to make up the difference? i...
i just put on new cylinder heads and new gaskets and started up the motor and it sputters and runs like shit. did a compression test and drivers side is 130-150 cold and pass side is between 0-60. my question is can the cam timing chain jump a tooth and still run without running into the piston...
looking to buy the revised 05 heads for the 03 cobras. prefer bare heads with just valves springs and retainers. my number 7 plug took a shit and theres a small hole next to the plug. pm me or text me if you have a set 760-518-6231
my 03 cobra is making a tick noise coming from the drivers side valve cover. does it all the time either cold or warm. its not very loud (more audible through the driver side exhaust) and seemed to have started when i broke the coupler on my kenne bell which was like 2 weeks ago and hasnt gotten...
looking to buy 26 spline input shaft and or a clutch better then stock for a 600hp stock t56 cobra. let me know what you got pm me or text 760 518 6231
i just installed jba long tube headers and there matching o/r h pipe and noticed i got like a 1lb higher reading in boost and i thought long tubes were supposed to drop the boost. i have a kb 2.6 and made 20lbs with stock manifolds and catted x pipe and now making like 21.5lbs with lts and or h...
anyone running these jba long tubes and matching catted h pipe on twin screw or pullied eaton cars. i just got a brand new set of coated long tubes and matching h pipe for a killer deal and was wondering if anyone on here is running them or knows anyone who is and if they make good power...
i have an 03 cobra with a kb 2.6 60s bap stock pumps sbtb mafia and cai. when i had it tuned it ran fine up until like a few weeks ago when the problem started basically when i give the car light throttle like if im moving up in traffic or when i rev my car out under light throttle it goes...
i am selling my diablosport mafia extender harness for an 86-04 ford which will eliminate a pegged maf when used with the stock maf. 100 o.b.o shipped. pics send number or email to 760-518-6231