Search results

Well thanks to SVTP I ended up selling my 04 last night. Its been good times for sure but I didnt have the time or desire to keep it. Sold it to an out of state buyer---Thanks James!! I will still check out the site but be without a Mustang for the first time in a long time.

SOLD SOLD SOLD SOLD!!!!!!!!!!! Walkaround video on page 2 post #47 for those who asked. A new thread was in order to update some items to my car that I have decided to sell after going back and forth on what to do. 2004 coupe for sale that I bought back in Oct 2007 with 35,500 miles...

Well after a night of relearning the car I am getting closer to where I wanted to be with track performance. After a few blower only passes it was time to hit the switch. Its nothing to write home to mom about but I am happy to say the least. With a purposely easy off the line on all passes...

After searching for a few days I have the idea that I want but need help to follow through with the project. After the tune I have the need for gauges and a way to monitor the car. I would like a wide band to to deal with A/F but need water and fuel pressure. I need a way to have the wide...

Looking to clean out some parts I guess I dont ever plan on using. 2.8 upper pulley cant remember who makes it but I want to say LFP. I used it back when I started modding the car. Probably 1500 miles of use. Been sitting in my office since. I polished the paint off of the front and back for...

I posted these in the timeslip bar and figured what the hell. I am happy with the numbers. Feels good and looking forward to next weekend at the track. If all goes well it wont break anything with the newfound power. Graph below are the corrected numbers from today. Uncorrected nitrous numbers...

I have been alittle busy as of late but wanted to fine tune some things in my tune. I finished up a little bit ago and figured I would share the results. The numbers below are corrected and I am happy to say the least. The uncorrected numbers on nitrous were 631hp and 721tq. That is what cool...

First off, I do question the ticket that I recieved but am more concerned about the way I was treated during the stop. I was pulled over today on my way to work. I have thought about the different ways this could have gone and wonder where it went wrong. The ticket was for "following too...

3 weeks ago I went to the track and broke the drivers side halfshaft. No big deal I replace it and go on my way. I am making my own subframe connectors and am under the car and notice grease being slung on the passenger side of the car?? I look and it seems to be coming from the halfshaft boot...

I have a few questions for my "long term" project. Its only long term becuase of money and time.:nonono: I am looking to do so on the skinny and learn something new. I have a spare IRS I plan on doing some work to and swapping with my stock unit when done. I want to set up my own gears and...

I picked up an spare IRS I plan on doing some work to. It will be a step by step process because money is a bit tight. I was looking for anyone in Fl that might have the bushing removal tools that I could borrow?? Just putting it out there to see if anyone local to the Sarasota/Bradenton area...

I bought my son (10 yrs old) his first laptop for X-mas this past Fri. It will be his to do projects on but I planned on using it to datalog my Cobra. It has Windows 7 installed which is ok, but when I try to download SCT Livewire onto the laptop it does not complete the install. I have to...

I did a search and found a few threads that kind of answered my question but wanted to get a new discussion going. What kind of power does it take to reach a 10 second timeslip in a Cobra. Now I know there are alot of different ways to do this. All of which seem to be not working for me. I am...

Well its the first major item that I have broke on this car. Figured I would share the carnage. It was a real mess cleaning all of the spattered grease. Picture says all of the tale. Shot with NIKON D40 at 2009-11-22 In case the picture is unclear that is the drivers side halfshaft...

Well I went for a test drive to get ready for the track tommorrow and after a few minutes cruising around 60 mph the ABS light came on in the dash. I thought that was odd. I went to a parking lot and turned off the car and restarted and the ABS light was off. Ok, so I plug in the SCT X3 to see...

Figured it has been cool enough to make my way to the track. Going to Bradenton Motorsports Park for a test and tune with a couple of friends. Just thought I would throw it out there for those who are intrested. If you see a 04 Redfire going slow on I-75 its just me driving on the drag setup...

Looking to sell my 2004 Redfire Cobra Coupe that is located in FL. Bought the car Oct 2007 with 35,500 miles and was original in stock form. It now has 40,250 miles and I am looking to sell. I am more involved with my kids and sports as they are getting older and really dont have the time to...

Looking to possible sell my 2004 Refire Cobra coupe that I have owned since Oct 2007. Bought the car with 35,500 miles bone stock. I have added everything myself and have reciepts for 90% of the parts. I started a book for the reciepts and 1/4 mile times with dyno sheets. Parts on the car are...

Does anyone have their car in a position to check the amount of threads exposed when the 15mm nut on the passenger side botton nut of the exhaust from header to midpipe? I am looking to cut the stud down for easier install and removal while I have the exhaust apart. Thanks

I have read through the "how to" and have a good understanding of what is needed. I have installed the input shaft and TOB retainer and have questions on checking the endplay properly. I have the dial indicator set up touching the input shaft set to 0. The spec is .000-.002. I am trying to move...

Well I knew it would be sooner or later so I decided to upgrade the clutch to handle what is being thrown at it. This is a stock clutch with say 39,000 miles of which 3,000 have been modded. Only the last say 1500 with the mods in sig. Car drove fine on the street and smelled only slightly at...

Its a long shot but thought I would throw it out here to see. Looking for someone with a Spec Stage 3+ clutch in their Mustang (Cobra) to see if its streetable like it says. Looking to drive the car around the block easy style to see if the clutch is going to work for me. I purchased a stage 2+...

Looking for a price on a TOB Sleeve, Fiore Clutch Quandrant kit, and a LDC freeplay kit for my 2004 Cobra. Shipping to 34293. Thanks

I just searched and couldnt find a "How To". I know what to do and how to do it with the steps involved, but looking for a check list of items that maybe some of you may have to speed the process along. Examples are torque specs and bolt sizes. I used to have the Ford Manual on the computer but...

I posted this in the driveline section but not getting too much love over there. Link to thread http://www.svtperformance.com/forums/driveline-216/576277-track-high-rpms-missing-shifts.html NMRA is less than a week away and the vendors give you great deals on site. Looking for potential...