Finally got on a dyno today. There were issues with the electrical signal hookup so torque would not properly display on an RPM graph, though I saw 540ftlbs before it disappeared once (which seems in the right ballpark). I'll find another dyno at some point. A Whipple Stage 2 on this same dyno...
SOLD
Never even opened them. I ordered them for my 16 before Lund would allow stock injectors +E85 + manifold swap and didn't end up needed them by the time he tuned it.
SOLD
Looking to do this on my new 16 GT (similar to GT350 will wrap in gloss black). Just curious to see if anyone had already done it with photos. I tried to search but didn't see anything for the S550s.
I've posted several times in the past chasing a boost loss issue for some time now. By boost loss I mean the car 1. won't reach a peak value consistent with the setup, 2. The car bleeds boost hard from 4500rpms to redline, most recently 15 psi to 10 or so by redline on the dyno two weeks ago. I...
Guys,
I have been chasing a problem for some time now that has me ready to pull my hair out. I have a boost problem that cannot be explained by any kind of boost leak or belt slip. I have changed and/or checked all of the vacuum lines that could possibly be the problem, pulled the blower...
Guys,
Which BAP do I need for twin GT pumps and a single modified FPDM? I'm aware that the GT pumps are good for 650whp. I just need to know which BAP works with the setup? Thanks!
Guys,
I posted about this before but after several attempts to fix this, I still have the problem.
Any input is appreciated. Car is extensively moddded (I built my own Whipple years ago and stupidly sold it but wanted to save the cash by buying one with the parts this time). Motor was...
Any input is appreciated. Just purchased the car about two weeks ago. Car is extensively moddded (I built my own Whipple years ago and stupidly sold it but wanted to save the cash by buying one with the parts this time). Motor was built by Terry at Street Lethal Performance in PA. It has a 2.3...
Can someone help me out here? I've looked around and can't find a thread on the combination of reasonably high boost for 93 octane with the cams (9:1 Compression on built motor). I was hoping someone could confirm TR6 is still the right plug and what gap to use with this setup. Thanks!
Stg 3 Cams 21psi Whipple 2.3, what will it make?
Hey Guys,
Just picked up a built Gen 2 Whipple 2.3 with stage 3 comp cams and 3"/4# lower (18.5psi) Curious as to what it would put down and trap in the 1/4 (3.73 gears as well). My old 03 I built was stock motor with 17#s on 93 and 19#s on 100...
http://www.autotrader.com/cars-for-sale/vehicledetails.xhtml?zip=15237&endYear=2004&modelCode1=MUST&showcaseOwnerId=69566731&startYear=2004&makeCode1=FORD&searchRadius=0&maxPrice=24000&mmt=%5BFORD%5BMUST%5BMUST%257CCobra%5D%5D%5B%5D%5D&minPrice=22000&listingId=400867082&Log=0All,
Just a heads...
2003 Mustang Cobra (More Pics Coming) Located Pittsburgh, PA
DSG Metallic
37,707 miles
601whp/540ftlb 93 Octane Tune 3" Pulley (17psi)
641whp/586ftlb 100 Octane Tune 2.75" Pulley (19psi)
Love this car but I just ordered a 2013 Mustang GT and I do not need two Mustangs. It...
I searched first but I couldn't find the maximum size people are fitting.
I'm picking up some 16" Pony stockers (7.5" I believe) and looking to fit a 28" Slick on them. What is the maximum size I'll be able to get on there?
I'm also between MT ETStreets and Hoosiers. I see people pulling...
I have owned my car since 2007. Up until last week it was a pullied Eaton (non-ported) with all supporting mods. Best E.T. was an 11.85 @ 121.3mph on Nitto 555Rs. As of last week, my friend and I both installed Whipple 2.3s, Mafias, 63lb injectors, BAP (he went the twin GT pumps route). We did...
I need the following and would like to buy as much used as possible to save some money:
KB 2.6H (will consider KB 2.4 or Whipple)
BAP
IRS Brace
Thanks, Chris
Does anyone have the dimensions of the Bassani BX (5 piece for Mid Length Header) Cat dimensions. I know they are 2.5" in/out. I was wondering if anyone knew the actual converter length and the pipe extension length beyond the converter? Any help (especially actual converter length) would be of...
FS: 2003 DSG Cobra, 31k miles
This car is immaculate. It has been garaged kept and stored throughout the winter. I have owned the car for nearly 2 years and have driven it less than 7k miles.
$22,500
31,100 miles
VIN #: 1FAFP48Y33F385956
Morgantown, WV/ Pittsburgh, PA
Large Pics...
As mentioned I currently have the UPR Firewall Adj and the Freeplay spring with the Quadrant on the way. However, I am leaving for Cruisin Ocean City on Thursday morning and it looks like the Quadrant might not make it here. Can I install the Firewall and Freeplay for the trip or not? The clutch...
I have a blown plug with no engine damage, bore scope was used. I want to use a helicoil to repair it and I have researched and spoken with enough people to convince myself that helicoil will do the job just fine. I was wondering who has done this and if there was infact a "4V kit" to do the...