Search results

So I was watching the 9-11 special on the national geographic channel the other day where it shows every bit of evidence leading up to SEPT 11 and it was no doubt pretty freaky. The sources are saying that there are going to be more terrorist attacks come this September 11th. The terrorist...

I have rims that are 7 inches wide. Off of a 1990 GT how big can i go with the tires. Could i possibly fit 265 width tires on them or 255 ? thanks guys

what is the biggest tire i can run on my stock 7 inch pony style wheel. im thinking 255 or 265 s right... right now they have 245 s on them

http://www.autotrader.com/fyc/vdp.jsp?car_id=184033064&dealer_id=56447408&car_year=1989&make=FORD&distance=25&lang=en&max_price=&model=MUST&sponsorModel=&end_year=1989&min_price=&certified=&address=20147&search_type=both&advanced=&start_year=1989&isp=y&cardist=0

I am selling my Red Mustang to get a motorcycle for the summer. 30,000 miles on new engine Ford Racing Block (30,000) Bored and Stroked to 331 Cobra Upper and lower Intake D.S.S Forged internals AFR 165cc Heads Crane Energizer Rocker Arms Crane Hardened Pushrods New Valves & Valve...

Lets see some old fox body movies i havent seen some in a long time...from racing to cruisin to idling hearing the purr of the engine....letsee up

I am not normally used to pushrod engines and we all know they make a clicking sound (the ch ch ch shhhhhhh sound) from the pushrods and rockers going up and down. How would you know if it is too much noise that you should open the engine up and tighten things down???

Would it be smart of me running nitrous like 75-100 shot on my cobra w/o aftermarket injectors. I got myself aftermarket fuel pump and pressure regulator i just want to know if i would hurt my engine w/oinjectors

Anyone selling #32-36lb injectors for a 93 cobra that would like to trade for a E303 cam please email me @ [email protected] or call me at (703)729-2111. I bought the cam drove 500 miles on it (good power) then decided I wanted to get nitrous so i got a AFM b31 cam with a .544 lift (good for...

Anyone selling #32-36lb injectors for a 93 cobra that would like to trade for a E303 cam please email me @ [email protected] or call me at (703)729-2111. I bought the cam drove 500 miles on it (good power) then decided I wanted to get nitrous so i got a AFM b31 cam with a .544 lift (good for...

Edited by L.L.

Just bought a compucar nitrous kit running through a NOS blue bottle. Im going to spray 100 shot on my 93 cobra that has B31 cam, AFR 165cc heads, 306 block with forged internals, 3.73 gears, tremec 3550 tranny, short shifter, 70mm throttle body, mac hts coated headers. All i have to do before i...

Just bought a compucar nitrous kit running through a NOS blue bottle. Im going to spray 100 shot on my 93 cobra that has B31 cam, AFR 165cc heads, 306 block with forged internals, 3.73 gears, tremec 3550 tranny, short shifter, 70mm throttle body, mac hts coated headers. All i have to do before i...

Sorry wrong place to put this but i get more feedback in here. Me against pontiac WS6 I know that a WS6 is no walk in the park but just look at the two mods and see what you think the outcome would be (obviously with driving skills so i know that part of it) From 2nd gear roll at 40mph...

just got my heads replaced 3000 miles ago when should i get a valve check?????

POst em up

Mustang Modifications as of Jan. 17 2005 1989 Notchback (RED) 93 Cobra Engine Bored and stroked to a 306 Forged Internals (PROBE) Newer FORD racing Block with 29,332 miles on it TREMEC 3550 Transmission (18,332 miles on it) King Cobra Clutch Short Shifter 3.73 Gears MAC...

How long do you think it would take for a shop (specializing in mustangs) to install Equal length headers and weld on the flanges that connect to the mufflers?? Tell me your standpoint on how long this would take because I just want to be sure they are not charging me for too much. they said...

I have the MAC pro chamber and one of the pipes ofter the chamber flowing to the mufflers broke off and is just hanging. will someone please tell me what i should do? is there a way to weld it or should i just get another prochamber?thanks for the advice guys i really appreciate it@!!

Modded 93 Cobra Ford Motorsport Block (25000) miles on it Tremec Transmission (15000) miles on it 3.73 gears Forged Internals (when i bought the car the guy said it was bored and stroked but he didn't tell me what it was.. all i know was that it was fast and i WANTED IT) AFR 165cc Heads...

Any Videos of 93 Cobras on Nitrous racing or running the 1320 Please POST THEM UP!!! Or any other videos of nitrous mustangs but i prefer 5.0 L because i am putting 100 shot in my 93 cobra and i want to see the damage it does to the pavement>>> thanks guys

This is my modded 93 Cobra engine 89 Notch Newer Ford Motorsport block IE.25000 miles Bored and stroked to a 306 or 331 (tell me what you think it would be by the sound of it guy said it was one of these when i bought it i just don't remember oops) Forged internals (for the future 100 shot)...

Selling E303 Cam who wants it call @ 7036092134

Do you think it would be safe for me to spray like 75 shot nitrous to my 93 cobra engine with a new aftermarket ford 302 block? Would it be as safe as a supercharger? i was thinking if i hooked it up right it could do less damage to my engine if i only sprayed it every once and a while at the...

I just ordered AFR 165cc heads HELL YA and i was just wondering what CAM i should get for my application with 1.7 roller rockers.. I want to find a cam that is not too expensive because mad bank was just pushed out on the heads... i was thinking trick flow stage 1 or 2 CAM ... which one would be...