My mods are 2.8 upper, Steg. stage III port, JLT 12. inch CAI, Prochamber midpipe, Borla CB, Gords HE, LFP intercooler tank, and a custom tune. No ice on the first pull. Car was strapped down and dynoed after a 1.5 our drive, so no cool down was done.
The last and forth pull was after a 15...
I'm looking at getting some Telstar wheels for the rear. What would be the proper wheel and tire sizes for the best performance and look?
Do you need any wheel spacers as well, and if so what size?
I can't get the rear diffential bolt #7 in that came with the Billetflow Diffential brace. I've shimmed and twisted it every way I can even according to the instructions. What do I need to do?
2004 Silver Metallic Cobra with 9050 miles.
Mods are:
Stage III Port
RR intake spacer
RR 2.80 upper pulley
K&N FIPK
Gords Ford HE
Prochamber midpipe
Borla Stinger Catback
Billetflow Differential brace-not yet installed
SCT X2 with Amazon racing tune
I also have a Billetflow pulley...
Ok I will take one for the team on this one and take the flaming. Many Cobra owners due to life changing situations are now selling. I see many threads where sellers whom are selling at book value get laughed at. Why I ask myself, which under much thought I have come up with the reasoning for...
I'm trying to get multiple local members to rent a local drag strip with me, but one of the members stated that the track owner wanted 2500.00 dollars to rent the track. That doesn't sound feasible to me what so ever. What is the general cost for those who have rented the track by the hour?
Is there a Larger Air filter for the K&N FIPK?
Who sells a larger filter for the K&N FIPK?
I'm looking for a 10 inch filter that flows more CFM. I believe the filter that comes with the K&N FIPK flows something in the neighborhood of 1500 CFM max.
Gas prices are outrageaous as it is which is disgusting. But on the other hand if I wan't to driver an aftermarket tuned performance vehicle then I'll have to pay high dollar for high octane. That doesn't bother me much because I'm willing to pay to play.
It makes it difficult when the gas...
My initial dyno last year with K&N FIPK, Prochamber, and Borla CB was 406hp, 367trq on a 83-84 degree day. A/F was started at about 13.2 at 2500rpm and went into 12.8-12.4 from 4600rpms-6500rpms. The new mods are in the Sig.
Well went to a group dyno yesterday and was the last car to dyno...
A few images of a Spark plug that I pulled. Several other plugs look like this also. They are NKG TR7-IX's gapped at 0.35
Mods are- 2.80 upper, Steg. stage III port, K&N FIPK CAI, RR-HBH intake spacer, Prochamber, Borla CB, Gords HE, custom SCT tune.
Sorry about the image quality.
OK just pulled a few of the plugs on the drivers side and noticed a white film or powder on the end of the plugs. Not the electrode itself but the end that curves around. Whether it's on the end of the electrode itself doesn't white mean lean or hot? They are NGK TR7-IX which is two steps...
What would sound better. I know either one of these combos is loud but I'm not bothered by a loud exhaust, especially since it's a track-weekend warrior type of car.
Where are you guys getting your Xcalibrator2 from. Everyone I talk too has no idea when they will be getting them. It's ticking me off. They keep saying it's on back order. :cuss: :cuss:
Was visiting another forum yesterday and several members of this forum were debating how the stock rev limiter worked, either by pulling timing or cutting fuel out. Anyone here know the right answer?
The next question was about a prgrammable 2 step limiter for launching at the track. They...
I was going home last night from work about 1030 p.m. on the interstate at 75 mph. I noticed a vehicle coming rather quickly behind in the left lane. No problem I'm thinking he must be in a hurry. As he gets beside me he slows down and slowly paces me then he takes off rather quickly. I'm...
What do you guys think of the new Excalibrator 2 coming out. I'm waiting for it's release and a tune from HPBH. Supposedly it'll be out by Tuesday.
http://www.modulardepot.com/product_info.php?cPath=21_47&products_id=219
I messed up bad the other day. Was jumping the relay to prime the intercooler pump after my HE install and as carefull as I was trying not too I touched the inner fender and shorted or blew something out. Now the pump will not come on again when I try to jump the relay. I was told that it is...
I posted this because I was really impressed with the Mustangs ablility to keep the passenger compartment intact in cases of Head-on collisions. I just worked an Head-on MVC between a late model 02-04 V6 Mustang and an 92-95 Chevy full size pickup crewcab. Speeds were approximately 55-60+...
I just installed my Gords HE. On refilling the coolant and checking for leaks does the fluid constantly circulate? The only time I have noticed it circulating was at the track after it was ran hard. I let the engine run to check for leaks and refill the coolant. After having the engine come...
What size belt for 2.80 pulley 100mm idler and HPBH intake spacer?
Ok what is the stock belt size? Is it 75.1" If so I just got done installing a 2.80 pulley with the 100mm idler and bracket, and HPBH intake spacer. The stock belt is too short. If so and the stock belt length is 75.1" then...