Search results

Hey guys, first i tried to search the topic, but kept getting this: 1. Sorry - no matches. Please try some different terms. The following words are either very common, too long, or too short and were not included in your search : intercooler Did something stupid. My car hasn't been run in a...

I'm in need of some front 03/04 cobra springs, let me know what you have and what you want for them. I need these because of some height issues and since they are linear they can be cut. Also need a dash harness, must be out of an 03/04 car, not necessarily a cobra, since according to my...

I need an 03/04 cobra hydroboost setup. It has to have the hoses, sorry but i'm not interested if you don't have the hoses. I don't need the rack or pump. Thanks, Joe

Well, a while back i got a HE bracket setup. Too bad the guy didn't tell me that a couple of the bushings were missing. They are NOT available seperate from ford. So if anyone has wrecked or damaged heat exchanger brackets that they could pull a bushing or two out of, i'd appreciate it...

Guys, i got a heat exchanger bracket from a guy on the internet, problem is that now that i am ready to use it, 3 of the 4 rubber bushings are missing. Ford doesn't sell them seperately. If anyone here has wrecked their car, i'd bet that the bushings are still good, even if the bracket is...

I'm still working on my foxbody cobra conversion. I have the HE and the brackets, but 3 of the rubber bushings are missing. I called ford and they only sell the bushings and the brackets together. Anyone make new aftermarket bushings?

My 03 cobra engine is going in my foxbody that has a saleen kit, and there just won't be room for these and the a/c condenser. I got them about a year and a half ago with the heat exchanger itself as part of a package deal with the engine, i'm keeping the HE (especially since it's been modified...

Guys, i need an 03/04 cobra stock alternator pulley. I figure someone would like to recoop a few bucks from buying an aftermarket one.

It's listed as the alternator bracket assembly. BUT, it's really the idler for the primary belt (back one) at the very top of the engine. It's a bracket with an idler on it. (not near the alterator) Ford only sells it as one piece, my idler is missing, but i have the bracket. Idlers in...

Reassembling the 03 cobra engine i have. Some odds and ends were missing. Got most of it, but i am missing one stud. Situation goes like this. The stud goes on the timing cover, NOT Through it. The pulley bridge rests on it. Passenger side, between the two top corner bolts. Old ford part...

Here's why i ask, my 03 cobra engine is missing the factory idlers for the primary belt setup (not the SC belt). If they are indeed all the same, the classifieds have plenty of factory idlers from people adding them for the SC belt for sale and i'll just pick up a few. If not, i have to goto...

Looking for a stock 03/04 cobra radiator reservoir. Preferably in nice condition. Sorry no use for any aftermarket version. You can post here with a shipped price. Thanks, Joe

Ok, here's the situation. Bought an 03 cobra engine, complete, but completely dissassembled. Had the whole thing redone. Never saw a windage tray in the pile of parts. So i purchased the arp bolts for the 2 bolt block and the engine builder put it together that way. Now i see the 03/04...

Hey guys, i'm looking to see if anyone is getting rid of any RR idlers. I already have one 100mm with bracket and 2.80 sc pulley, so i figure i need another 2 100's and a 90mm. Not sure if i can just use 4 100's since i hear the 90 is hard to come by. thanks.

First off this is NOT a for sale post. I have an 03/04 cobra engine that i purchased dissassembled from a guy that was going to build a turbo monster, but supposidly ran out of funds. It was 100% dissassebled. As of right now the long block has been balanced, honed, new bearings, file to fit...

Mine were peeling, so my brother blasted them spotless for me. What's the best way to paint them so they last? I'd rather not get into powdercoating, i am already way the hell over budget, and places by me want $175 to do the set, and at the moment they don't fall into the category of "needed"...

Maybe some of you knew this already, but in a search here i didn't find it. In my search for a set of HG's, i called Fel pro to see the part numbers. Simply calling distibuters doesn't work, since nobody ever differentiates between DOHC SC's and regular DOHC engines, including summit and Jegs...

My dilema is this, i have an unassembled 03 cobra engine. Fine condition, but the last guy that had it took it apart, i mean all of it. Not sure what his plan was, but i brought all the shortblock parts and block to the machine shop and they said it looks to be fine, no scoring or damage. I'd...

Here's the situation. I have 2 03 cobra computers, same code. Engine is going in my fox, so it will need a custom tune. I want to sell one to recoop some cash. One probably had a chip in it, since the little cover is missing. The other doesn't appear to of been opened. I have no...

Guys, my engine has to be assembled soon (from an 03 cobra, going in my fox). I need to pick up some some bolts and head gaskets. First off, which set is for the main caps? I read in some places that the arp 156-5401 is for all modular iron block engines, and some sites suggest that is SOHC...

Guys, my 03 cobra engine is completely apart. I have the heads with the blue paint on them. Before the engine goes back together i'd like to have them checked out, since it's so tight in a fox that the engine may have to come out to get the heads off. In case of some kind of failure. The...

Ok guys, my engine is at the machine shop. It's out of a 2003 cobra. My engine builder wants to go .10 over. Use 23cc manley dish platnum series race pistons. Making the compression like 8:5:1 ,Std (non offset) He seems to be very worried about the compression ratio, and does'nt want me...

Guys, i'm selling this heat exchanger, because it is way to big for me to fit on my foxbody, the fans are too deep considering i have an lx with saleen kit, besides i spoke with the gords guy and he will make me one with the inlet and outlet on the sides which is what i'll need. I got this in...

Hey guys, i've been looking for an 03/04 cobra engine as complete as possible, seems that's no so easy to find. Doing,or going to try and do a fox body conversion, if i can a hold of this damn engine) There's a few on ebay, but the one that is reasonable is sold and the guy told me he's...