Yes I will eventually do the boss / cobra ported setup but for now I want to do the stock 5.0 manifold / tb. Does anyone have the link to Shaun AED’s manifold work ?
I don’t want to do too much to it and loose power.
I’m the same as the OP.
The 11-12 front ends look a lot better then the 13-14’s ( with the 13-14 headlights in ).
&
The rear tails on the 13-14’s look awesome.
I plan on switching to the 13-14 but in my area they cost so damn much. :(
Anyways to the OP ; do it ! Will look nice !!!
hi I apologize but I searched and did not find the thread.
I believe Shaun from AED gained 8whp across , by porting the stock Coyote intake manifold ?
I bought a stock tb and intake manifold. I have a guy that will bore the stock tb to 85mm. Now I’m looking at what to do to the stock...
Ok thanks to the couple of you that gave honest/positive answers.
If you have nothing positive to say keep your 0.02 to your self !!! Thanks !!!
I was thinking of adding a set of long tubes but the cost of headers and the install is just nuts. Unless I can find someone locally who will...
Hey guys,
I’m trying to make my Mustang the loudest it can be.
Last year I had : Jba off road H-pipe , no resonators , pypes Bomb Axel Back Muffler deletes ( tips were resonated about 10” )
This Year :
Pypes off road X-pipe , no resonators, MBRP axel back muffler deletes. ( this setup I...
Update :
Car has gone 12.5 @ 115mph with a 1.9 60'
18x10 Shelby Rims with 285/40/18 Nitto Nt05r tires.
Setup :
Airraid Cai
Jba offroad h
Bmr drag springs - koni Yellows
Steeda uca
Bmr pan hard bar & brace
Bmr lower control arms
Alum D/S
Pypes Muffler deletes
Bmr front sway bar delete...
Im not looking for " too much gear , you dont want 4.10's " etc.
Im looking for people who ACTUALLY have 4.10 gears , there set-up and there 1/4 mile times.
Thanks,
Ok so my best time at the track was on my Nitto Nt05r tires. I had 18x10 rims, and 285/40/18 Nittos.
I hit a best of 12.49 @ 112 mph with a 1.9 60' ft.
Yet on a michellin 19" tire 265/40/19 i ran a 12.79 @ 117 mph with a 2.1 60' .
So clearly the car can do a 11.9 1/4 mile as is if I can...
I already bought the 4.10 gears and install kit.
Car makes : 410whp/394wtq.
Cai, off road h-pipe , axel back exhaust , tune.
Suspension : bmr front sway bar delete, bmr drag springs , koni yellow adj.shocks, adj. rear upper arm, lower control arms and brackets, panhard bar and brace...
Does anyone have any 1/4 mile times with a 2011+ mustang Gt with 4.10 gears and other mods ?
Im planning to go 4.10's , my mustang is 80% street driven and 20% track.
Im aiming for 11's n/a, 4.10's , bolt-ons, slicks and a tune.
What size tires / rims etc would I need ?
Best time so far is...
Ok guys here was my set-up when I ran 12.7 @115mph
Car is a : 2011 Mustang GT Convertible. Manual with 3.55gears :
2011 Mustang GT 6-Sp's Manual 3.55 gears.
- AirRaid Cai
- Jba Off-road H-pipe
-Pypes Axel back
- Bama 93 v2R Tune
- Steeda Adj. UCA
- Whiteline LCA's
Tires were : 265/40/19...
Hi guys,
2011 Mustang GT Convertible.
6-Spd manual.
3.55gears
Mods :
AirRaid Cai
Bama 93R v2 Tune
Jba Off-Road H-pipe
Pypes Axel Back
Bmr Front rad support/sway bar delete
Bmr Rear Drag springs
Koni Adj. RearShocks
Steeda Adj. Uca
WhiteLine Lower Control Arms
WhiteLine Lower Control Arm...
Hi,
So I brought my 2011 5.0L conv. To the track stock.
And it had VERY BAD wheel hop. I had to take off at idle. It ran 13.4@108mph. All traction controls off.
I could not even take off at anything above idle or there would be VERY BAD wheel hop.
So I bought some brand new : Steeda...
Hi everyone,
im aiming for some 11's before storing the stang for the winter.
setup :
2011 Mustang GT 6-Sp's Manual 3.55 gears.
- AirRaid Cai
- Jba Off-road H-pipe
-Pypes Axel back
- Bama 93 v2R Tune
- Steeda Adj. UCA
- Whiteline LCA's
Made 410whp / 394wtq.
has run 12.7 @ 116mph.
heres...
So I installed a new Exedy Clutch kit and re-surfaced the oem flywheel.
i have been driving the car nice and easy for break in procedure. ( btw this clutch feels MUCH better than oem )
After about 600kms, I get a flashing CEL on highway, car loses a bit of power. I was going to pull over but...
Ok so I just got back from the track on Friday night.
It was dead at the track ( Toronto Motorsports Park ) Ontario,Canada.
It was a warm night about 25degrees.
Left lane was not sticky enough so I kept going in the right lane.
1st pass : Trac Off ( just quickly pushed the button )
wanted...
Ok guys I'm looking for some suspension help to ensure I'm getting low 60' .
I took car bone stock to the track , full tank of gas ( 2011,5.0,manual,3.55,convertible )
it did 13.4 @ 107 mph ( took off on idle , 60' was a 2.1 )
im aiming for 11.80-12.00 times.
Wheel hop hop was horrible with...
Hi guys so I put my car on the Dyno this week.
Its bone stock. Just Pypes Axel Back ( Muffler deletes )
Its a 2011 Mustang Gt 6spd-Manual. Convertible
5th gear pull 1 :
377whp / 367wtq
Let car cool down
5th gear pull 2 :
381whp / 373wtq
At the track it did : 13.5 with Trac-Control ON
13.4...
Hi guys,
so I took my 5.0 to the track for the 1st time.
its a 2011 GT convertible. 6-sped manual brembo track pack.
it has 3.55 gears and 255/40/19 pirelli sotozeros winters.
car is stock except for axle backs and a Barton 2 post.
so there was an event so only got a few passes down.
The 2...
Hi guys.
Im new to the site.
I picked up a 2011 Mustang Gt brembo pack last Sept (6spd Manual) Its an amazing machine!!
Skip shift was annoying so I had it un-plugged. Also I hate how it shifts. Im thining of getting a Steeda Base Shifter upgrade ? And a local guy was selling a 1 week old...