Search results

Case closed. Sometimes we check too far and overlook the most obvious things... It was the tb to elbow gasket. The idle opening was bigger on the gasket as 01yellercobra said. Thanks everyone !

throttle cable is operating freely. And yes the car was running good before with the BBK tbs. Please take a look at the TB/gasket in the picture above and the Blower elbow.. Maybe it doenst' seal right. Will test fit again and add RTV maybe ..

Yes the blades are closed and the TPS is reading .94v. The gasket between the tb and the elbow is in good shape And BTW i also sprayed brake cleaner almost everywhere in the engine bay and no change at all

Hi , I had a sticking BBK tb , and to compensate I openned the blades a bit more and readjusted the tps. But I was too far open , the car was not able to compensate .so I "sanded" the tb blades to try to eliminate the sticking tb when hot. Unfortunnatly I sanded them too much ...lol So I...

how much cash do you want on top of a OEM TB and Gen1 TVS elbow stock style ?

money sent for a Shirt.

I had a similar knock and I thought it was a rod knock , but it was only a timing chain tensionner.. I hope it is the same for you

And if we increase the boost by 1-2 psi , and if the car is tuned properly , normaly the tune should also be safe right ? If the AFR are still ok at WOT

Here the sound my car was making when my passenger side primary timing chain tensioner was bad.

Sorry, I need a 03/04 cobra one

Ttt

Looking for new primary chains and secondary chains . Or a complete timing kit. Located in Canada

Looking for brand new never used timing chains (primary and secondary) or a complete timing kit. Located in Canada

Up

Up

Looking for an 03-04 cobra oil cooler, I only need the part where the prestone hose connects. Located in Canada

up

Want to buy an oem 03/04 cobra harmonic damper ! Must be able to ship to Canada.

still available ?

A gargen sprayer like this? I will also need a hose and a fitting to screw in the oil pressure sender hole

Loud knocking sound coming from my engine, seems to be coming from passenger side/middle of engine. The noise is louder when the engine is warm. Took the compression and all the 8 cylinders were equal. Plugs looks good. Not even 2000 miles ago I sent my motor for headstuds, new rings, honed...

Made my own

Pm sent

is the PRP sold ?

Payment and address sent.