Search results

I'm going from a CJ to 2018 manifold with my procharged 2014 because of driveability issues and was just wondering what I need to make the TB connector fit back up with the stock TB and not the GT500 style. We messed up the stock connector getting the pins out during the install and it's been a...

So I installed my 1050x injectors without changing the USCAR connectors because mine weren't in the box, or the shop I bought them off took them out for whatever reason. Are these meant to be direct plug and play or am I going to mess anything up without changing to them. Car is tuned and makes...

As title says WTB: FRPP Twin 65mm TB. I'm in British Columbia Canada so I'll pay shipping if the cost makes sense for me. Thanks

Delete thread if not allowed. Posted in the 11-14 GT section.

I know it's a thing with the twin screws but has anyone ever done it with a Procharger setup? I've got the hole near the air filter plugged on the Procharger before the head unit so it wouldn't be hard to hook up. I don't know if it would sound like ass but I like the sound when people put...

My 2014 just started leaking all over the passenger side under the seat from the footwell to the back seat. I checked under the shroud near the cabin filter and it doesn't seem like there's any build up of leaves/water in there. Called Ford and they said it probably isn't covered by warranty...

Looking to upgrade my ZR downforce wheels. Originally wanted Forgestar/Velgens as i'm pretty set on a 305 rear (possibly nt555r) and wanted to make sure I had enough offset. Started looking at the HRE lineup and think i'm going to go with the FF04's. I know they're pricey but don't mind...

Just installed my procharger w/ cobra jet setup and am learning quickly that i'll need better tires to put any power down past 3rd gear. Are there any tires non drag radial that would be remotely competent? Thinking about going to a nt555r as the car is my daily and they seem to get the most...

Installed my procharger stg 2 kit and was a little disappointed at how quiet the stock pro flow bypass is. Going to be ordering a big red race valve and was just wondering if it will be a bolt on to my existing piping right before the intercooler or will I have to cut off the stock bypass hole...

So I've completed my Cobra Jet intake Procharger setup tuned by Lund on a startup tune. The car runs and drives real good. Going for a remote dyno session next Tuesday. The other night when I was leaving work I was just testing and if I do a little burner in 1st gear up to 5-6k it spins the...

So after longer than I care to admit working on it, the P1X stage 2 kit is on the car. Just need to do the plugs and set up the JMS BAP. I'm not well versed in how to setup the BAP. I have it routed from the fuel pump with the plug and play connector all the way up to the pedal but I see...

So I ordered my Procharger P1X stage 2 w/1050x/BAP. Just trying to get all the odds and ends I'll need to make it work with my Cobra Jet before I start taking things apart. Looks like I got some time with the weather forecast in my area anyhow. So I've searched a bunch and ended up getting...

Currently have a Cobra Jet intake with long tubes. Was wondering if there was anything else needed to make it work other than the custom tube for the Cobra Jet oval TB. There's only about 1 video on youtube of the Cobra Jet/Procharger making around 700whp. I'm still on the stock...

Hi all I bought a set of rotors/pads off AM right around May and had them installed. https://www.americanmuscle.com/xtremestop-rotor-ceramic-kit-brembo-1114gt.html I know rotors get rusty when they get hit by water almost instantly but I've never had it coat the inside of my wheels with sling...

Anyone have experience using a JMS PedalMax. https://lmr.com/item/JMS-PX50001114F/jms-mustang-pedalax-1115-px-5000-1114f Throttle response leaves a little bit to be desired in these cars. Just wondering if this is gimmicky or worth while. Edit: someone in youtube comments say Lund doesn't...

About to tackle the install of my Cobra Jet intake and I'm 90% sure from watching videos and reading over the instructions ahead of time that it's all gonna go smooth. Only question I have is what part is this in the picture? There's no pictures of it in the instructions or any mention of it...

Just got some 20" wheels and would like to match them with some drilled/slotted rotors. Any suggestions? The cheap ones on LMR look good but all the reviews complain about rust in all the non contact surface areas. Next step up in price is the Stop Tech rotors on AM. Don't have the coin to...

Hi all. I've got a 2014 GT with long tubes/CAI currently tuned with HP Tuners at a local shop. Car made good power on the dyno but i'm not 100% sold on the tune as it does have the occasional stall. Not wanting to take it back just cause i'm not comfortable with their ability with coyote...

Sorry if it's been asked a million times, I just keep coming up with 285/30 or 305/30 for the wheels i'm looking to buy. Wheels are ZR Downforce 20x8.5/20x10 off LMR/Wheelreplicas.com 20x10 +40mm offset 7.05" backspacing I can get a super cheap deal on some 305/35/20 rears but i'm worried...