Search results

2003 TR Cobra 10th Anniversary I have decided to sell my cobra in order to free up some money for my wife to go back to school full time. I had to think long and hard before I came up with this decision but it is the most logical thing to do as of this moment. I have owned this car for 2.5...

Looking for a used jlt rai and a boost gauge. Sent from my iPhone using Tapatalk

When I purchased my cobra it had a 2.3 whipple with a 2.9 pulley and it made 19 lbs of boost when on the dyno. It never had a boost gauge just a dyno sheet saying what boost and power it made. I recently installed a 2.9 standard whipple and a speedhut boost gauge. When I went to datalog I seen...

Delete

Just recently installed my speedhut boost/vacuum gauge and at idle it is reading 10 in of vacuum. I have been searching but can not find a definite answer. I do have stage 3 comp cams and recently installed a 2.9 whipple. My idle is fluctuating or surging from 750-1000 when warm and the vacuum...

Is there a way to enter in the equation for the wideband in analog on a already saved log? I forgot to enter the equation before I did my pull for tuning so the analog is reading right. It is suppose to be raining for the next couple of days or I would just got make another pull. Sent from...

Looking to buy a SOS gauge pillar and a speedhut boost gauge before buying new. Sent from my iPhone using Tapatalk

Just now starting my car after my upgrades and I am pulling a p0463 code. Once I started the car I noticed that the gauge was said empty but I just added 11 gallons minutes before. Letting it warm up to operating temp to datalog the check engine light came up. Has anyone had this problem? What...

I have searching and searching on how to connect the wideband to sct x3. I have purchased a FireWire cable but every where I have searched said to connect different wires. Has anyone done this and can explain on what exactly gets connected to the wideband from the FireWire cable? Pictures of the...

I am finishing up my 2.9 whipple install and should be ready to start later this afternoon. I had a 2.3 whipple on it before and a custom tune for 93 octane on that setup, would this current tune be ok to start and get it to the tuner? I still haven't decided which tuner I will be using so not...

I am finishing up my 2.9 whipple install and should be ready to start later this afternoon. I had a 2.3 whipple on it before and a custom tune for 93 octane on that setup, would this current tune be ok to start and get it to the tuner? I still haven't decided which tuner I will be using so not...

Sheared off a lower intake to head bolts today going off of the wrong torque 15 ft lb, I now know the right 89 in lb. I am looking for replacement bolts either oem or other bolts that could be used. Anyone have part number for the bolts? Sent from my iPhone using Tapatalk

2.9 whipple owners. How is your intercooler hose that connects to the intercooler manifold right under the snout routed? I have tried routing it a couple of ways and can not find a way to route it without it having a kink in it. Sent from my iPhone using Tapatalk

I have a 2.3 whipple gen 2 that I just removed from my cobra. It has a polished snout, polished assembly bolts and polished lower plate. It is leaking supercharger oil so it will need new seals. Price is $1900 shipped plus pp fees Location is New Bern, NC Text for more info 229-854-2467...

What would be a fair asking price for a 2.3 whipple gen 2 that is leaking supercharger oil? Has smoothed and polished assembly bolts and polished snout. Has about 5,000 miles since rebuild from Jon bond. Would need to be resealed. Sent from my iPhone using Tapatalk

I'm in the process of changing the 2.3 to 2.9 whipple. I have been searching and looking at diagrams of the vacuum lines and how they are ran but still have questions. On the 2.3 whipple the line that connects to the barb has four connections to it. One from the bypass actuator, and one from a...

Does anyone clean their gas tank at any point? When changing pumps or dropping the tank at any point? I have some debris in my tank and don't know if I sho or clean the tank before installing my pumps? Sent from my iPhone using Tapatalk

Looking for different pulley options to run e85. I have a 2.9rr pulley that I ran with my 2.3 whipple making 19lbs. I can't find anything on the 2.9 whipples with a upper pulley smaller than 3.0. Could I use my 2.9rr pulley for e85 on the 2.9 whipple or should I look for different pulley...

Looking for a dual pump fuel hat that will fit walbro 465 before I have to buy new. Sent from my iPhone using Tapatalk

I am finally starting to install my fuel pumps for e85 and have came to a point where I have questions before I proceed. I have a dual pump fore hat with dual gss342 pumps that I am replacing with walbro 465s, I have noticed when removing the old pumps from hat that the two pumps are different...

Looking to buy these parts: SOS pod for 04 coupe Speedhut gauges ID1000 Whipple 3.25 pulley RR

Since I decided to keep the cobra I purchased a 2.9 to upgrade from the 2.3 whipped I currently have. Right now I am running 93 and plan to when I initially install the 2.9. With that being said I do want to run E85 but since there is only one station that is 45 min away I am going to stick with...

3" stainless works catback and midpipe for long tube headers. Exhaust was on car for maybe 30 miles.Message me if interested. Price is 800 shipped +fees Sent from my iPhone using Tapatalk

Update

I have recently found some e85 stations about an hour away and I'm wanting to convert. I don't drive my car a lot so I figured i could buy 3-5 vp plastic drums to store the fuel. My car is a 03 cobra built motor, cams, 2.3 whipple, full exhaust and return fuel system. I have a fore return style...