Search results

I have a few misc parts for sale off an 01 Cobra. Computer $75 shipped Hydo Booster $75 shipped Instrument Cluster $75 shipped I have pictures but have no idea how to attach them if you want to see pics I can email them just give me your email address. You can also call me with...

I was planning on rebuilding my 03 Cobra I blew up over 2 years ago and I decided not to so Im selling the parts. All the parts are new in the box unless otherwise specified. I also have the 03 Cobra for sale as well on this site. Its built to handle horsepower and can be used for a track or...

I have a Red 2003 Mustang Cobra. It is a rolling chassis only with no motor or transmission. It has a 12 point welded in roll cage, solid rear end with 3:73 gears and a Detroit locker differential with 31spline Moser axles, UPR upper and lower control arm kit with upgraded hardware, a welded in...

Fidanza Aluminum Flywheel(used) Complete internals that I will sell individually, which include : CP Pistons with a 17cc dish Manley Billet I beam Rods ARP head studs Speedco Main Bearing Clevete Rod Bearings ARP Main studs Canton oil pan with pickup and windage tray Upgraded high...

Fidanza Aluminum Flywheel(used) Complete internals that I will sell individually, which include : CP Pistons with a 17cc dish Manley Billet I beam Rods ARP head studs Speedco Main Bearing Clevete Rod Bearings ARP Main studs Canton oil pan with pickup and windage tray Upgraded high...

This is a Red 2003 Mustang Cobra. It is a rolling chassis only with no motor or transmission. It has a 12 point welded in roll cage, solid rear end with 3:73 gears and a Detroit locker differential with 31spline Moser axles, UPR upper and lower control arm kit with upgraded hardware, a welded...

This is a 2003 Mustang Cobra I aborted the mission of installing a HP Twin Turbo setup which by the way I still have, I will have to check the mileage since i havent driven it in almost 2 years but I think its at 37K. It has never been in an accident. I'm the original owner. This auction is for...

This is a Redfire 2003 Mustang Cobra I aborted the mission of installing a HP Twin Turbo setup which by the way I still have, I will have to check the mileage since i havent driven it in almost 2 years but I think its at 37K. It has never been in an accident. I'm the original owner. This auction...

I have an Red 03 Cobra chassis I’m selling. It has a 12 point roll cage, solid rear end, UPR upper and lower control arms, an anti-roll bar, reinforced torque boxes, Weld 15" rims with MT slicks, Boost/AF gauge in a pod on the column next to the windshield, Line lock kit, RJS 5 point harnesses...

I purchased a HP gt35 61mm ball bearing kit with 75lbs injectors, and anelectronic boost controller backlon 6/5/06 and expect it to arrive starting monday, they said it will be 4 to 6 weeks well its been just about 4 and im consider selling it. My total invoice was $9135.00 and will show it to...

I purchased a HP gt35 61mm ball bearing kit with 75lbs injectors, and an electronic boost controller back on 6/5/06 and expect it to arrive starting monday, they said it will be 4 to 6 weeks well its been just about 4 and im consider selling it. My total invoice was $9135.00 and will show it to...

I ordered my HP TT kit i got the GT35 ball bearing kit, i was hoping someone knows what cams are a good replacement to go with. i was gonna order Crower Stage 3. Any input on this or other cams woudl be nice. any any opinions on the other internals as well but i think i have that pretty much...

Seeing how i just bought the HP 61mm kit i wont be need alot of parts. Before i tore the motor down with a Procharger P1SC2 the car dyno'd at 640 to the wheels. i added a 100 shot and it made 750. That was with a 2800 MAF 60lbs injectors and a BAP. The car went lean at 750 and thats why im going...

just bought an HP turbo kit today i got the GT35 61mm ball bearing kit. Im having my block bored 20 over and putting in the following (if anyone thinks i should have somerthing different im open to suggestiosn or if kno wwhere the cheapest places are, as ill be ordering this all tomorrow)...

I upgraded to a 2800 several months ago i have alot of parts. 2400 SCT MAF Stock 03 Blower with 2.8 Most all interior parts for 2000 GT (seats are in great cond) Reichard Racing 3.4 non slip pulley Pony wheels (free if can pick up in Jax fl) have MT et streets but are gone ill be...

I getting ready to pull my motor for a total rebuild crank, pistons, cams, rods etc. My question is shoudl i have a local shop who wants only $450 to pull it worth it or should i yank it out myself. i ve done engine swaps before and consider myself mechanically inclined but some engine pulls are...

My car made 767 to the wheels and just died.... My point to theis thread is to be informative and hope to get some info as well. To answer any questions of when the fuel system is done is this. i had a Boost a pum and 60s thats it no lines rails or wiring. I had ran to 720 to the wheels for 6 to...

Turbo will be ordered Monday. i currently have a procharged 03 cobra with an 80 shot making 721 to the wheels. i have completely stock fuel system except for a BAP im happy with the #s but my torque is only 600 going turbo will increase the #;s teh whole way around plus be less stress on...

721HP Cobra only running a 10.853 @ 130.85 HELP I have an 03 Cobra with a Procharger P1SC2 making 18 psi and a 100 HP of NOS. i have a solid 8.8 with 3.89 gears, roll cage, upper and lower upr contol arms, anti roll bar, 12 way QA1 shocks(set at 3), sub frame connectors. The car makes 612 on...

i have a 03 cobra with a 99 gt rear end does anyone know if its 5 on 4.50 or 5 on 4.75? thanks

I have an 03 cobra with a p1sc2 it was running fine when i decided to go with a solid axle and while it was being worked on by myself i changed some tubing on the inlet side (shortened the pipe frfom maf to blower where air filter is) and went to a 2800 sct maf from a 2400. well o I got the rear...

Im in the market for new rims and slicks, whats the biggest tire and rim I can put under the car? What size up front can be used? I have a solid axle 8.8. They are going to be used mostly on the track with little street use. The car also has 3.90 gears in it.

call me a t 315-525-6281 if interested or questions. John

Call me if you have questions or want it i can do paypal. 315-525-6281 john

Like it says i have a SCT MAF 2400 $200 shipped. Call me if you have questions or want it 315-525-6281 John. i can do paypal.