I'm in the process of doing my oil pump gear install. I'm also installing a billet crank sprocket. I've used Blazer's DIY thread with great success so far. However, the QR cam code method won't work well since I'm replacing the crank sprocket.
Does anyone know where I can find the actual...
I'm in the process of doing my oil pump gear install. I'm also installing a billet crank sprocket. I've used Blazer's DIY thread with great success so far. However, the QR cam code method won't work well since I'm replacing the crank sprocket.
Does anyone know where I can find the actual...
Are iridium plugs recommended for this setup? CJ intake manifold, LT headers pipe etc. Thanks in advance. Plugs are fouled and dealer near me is closed.
Anyone here know how to get in touch with someone at trueforged wheels? I keep trying to call and get no answer. There is no message that they are out or anything.
Changed my oil recently. Today I checked the oil level and noticed there was a lot of oil around the tube. Also oil level was about a quart low. Runs and drives fine, no smoke.
I already think I know it's a bad piston ring but I'm hoping someone says otherwise. Mods are CJ setup, long...
Hi. Before anyone tells me to hit the search I just want to say I have been doing that for the last few days trying to understand and figure out how to do this. So I've already installed the cobra jet manifold. Now I'm looking at the connector jumper harness.
I have the LMR hose kit I...
I'm in the process of installing the ford racing radiator. Does the ax condenser have to come out? There are two bolts holding the radiator to the condenser that I cannot access toward the top. The two on the bottom are fine, but the two at the top are covered by the radiator support brace...
Need some adapters to make the tpm sensors work on my car and I can't get in touch with him. I've tried emailing, no response. By the way what do you guys do for the tpm sensors in the wheels? I read they will come in contact with the brembo brakes.
I've done a few searches already and haven't really found anything definitive on the subject. I know some lower their motors to clear the boss bar. Any other manufacturers make one specific?
Where are Forgestar wheels made? I called them directly, spoke with Steve who says he is the sales manager. Steve says they are 80% made made in the US. But he admits the wheels come already formed in what ever size and design, such as F-14's from a foreign country. They are painted and bolt...
Looking at getting a gt40 intake with 24lb injectors and fuel rails. Only thing is its non egr, so can I swap the one on my stock intake onto the gt40? Or will I need to do the egr delete thing? What does that entail? Also, my car is an 87 gt converted to maf.
Thinking about getting 17" wheels for my lowered fox. I hear that a lot of guys have rubbing with 17x9" in the front on lowered cars, which mine is. My question is how bad will it rub with 245/45/17's on the front with 9" wide tire? Will it be too much? Thanks in advance.
I've been a member of this site for a while already since I own an 11 mustang gt. I'm buying an 87 vert I found on eBay in ok shape, it has potential. Mainly I bought it as a project for me and my son to work on together. I'm getting the car pretty cheap. Besides, I've always wanted a fox...
So after 3 years and almost 19k miles you would think the motor would be broken in and no more oil consumption. Since the weather's been nice around here past few days I've been driving my car daily. I go out to check the oil yesterday and its half way between the two points when it was full...
This engine makes many different sounds some are normal and some aren't. Not all coyotes makes these noises. The noise I'm speaking of is not one that any available tsb will fix, I've had them all done. I've been following a few guys through YouTube who have the same exact noise. A few of...
I've noticed a noise coming from the passenger side of the engine since the second oil change. I've been to several dealers at least 4 times for this issue. They've done various tsb's but the noise persists. I love my car but this is really bugging me and taking away from my enjoyment of it...
My car just had its third oil change and the tick that's been gone now for a few months and a few thousand miles is back with a vengeance. I used redline 5w-20 oil and ford oil filter. Is this going to be the normal deal at every oil change interval?
The tick is heard both under load or...
I've been having some issues with hub rings and my wheels. My car is bremboed and the 70.5mm hub rings are very tight. If it were metal ring it wouldn't fit. Yet a 70.6 fits smoothly over the hub. I've read all mustangs are 70.5 so do the brembo cars have different hub bores or is very car...
I've never posted my car before and within the past two weeks got a few more mods so I finally had time today and the car was pretty clean with all the mods. I'm done for now.
I had the tires mounted on a new set of eurotek 19' wheels and when the shop went to put them on there were fitment issues with the hubcentric rings as they were too tight and deforming and couldn't get the wheels to sit flat against the hub of the car. Now when I drive on the highway I get a...