What do you want to know/see? I've posted pics and left extensive feedback.
Unfortunately I don't really have a baseline of pre-temp/post temp. Warm up doesn't take long like others have suggested. I don't think a thermostat will be required.
All seems to be working well. No leaks
4) Block off plate installed with 90* AN fitting. The MMR website shows the straight fittings used here - I tried to use them, but the alternator was too close. The 90* elbows worked much better.
5) Finally, if you choose to mount it like I have, you'll need an extra 6' or so of 10AN hose.
3) cooler mounted between the intercooler and the AC condenser. Raise it as high as possible if you choose to use the straight AN fitting hose ends because the hose needs a little space to bend the 90*.
Ok just a small update - pictures will come soon.
1) MMR suggests mounting the cooler parallel to the ground. I experimented with a couple spots where it was flat, but I really didn't feel comfortable having such a critical and delicate part so close to the ground where debris or a speed bump...
Yeah the upper alternator bracket I received didn't clear the alternator body correctly. I wish I took a photo. Really easy to modify - small amount of grinding required. You'll see right away if you assemble it off the car first.
As for the thermostat, I may add one if warm up is really...
Re-reading my post above, I realize that it seems a little harsh towards MMR's design - which is not my intention. My intention is to help prepare installers for some potential challenges that they may have.
None of the annoyances I've found so far are insurmountable and I think overall the...
SO - while installing Kooks headers on my GT500, I decided to remove my K-member. In doing so, I guess I lowered the engine a little, and bent the stock cooler barb. Since the stock cooler is basically ruined - I decided to give the MMR kit a try. Added cooling - why not!
I received my...
Hey Gang,
Hoping for a little help. My SCT flasher won't boot up when plugged into my 96 cobra - but boots when i plug it into my other vehicle. Tried my buddy's flasher and it also didn't book up in my stang.
I was able to measure 12V on pin 16 - so I'm definitely getting power to the...
Canadian 2004 Cobra Convertible, Oxford White, Dark Charcoal Seats. Custom dyno tuned by Diago @ DCT Tuning (Toronto) 475 RWHP, 465 RWTQ
Always garaged, and rain was always avoided – of course, never winder driven. This is a fair weather weekend cruise car not an abused track car. Car has a...
Hey Guys,
This is something that I've been wondered about recently. Our pumps are a HUGE PITA to get to. Drain the tank, drop the tank, etc. BUT many people who have an upgraded fuel systems have maintained an in-tank setup. For the life of me, I can't figure out why??
For $125 you can get...
Bought the car from a member back in July of 2013. The owner had purchased it the previous September and since started experiencing a nasty knocking sound from the motor.
Here is a list of the mods done to it:
-63,000 kms
-Ported Eaton
Borla Cat back w/Stingers Exhaust
BBK LT Headers...
SEE VIDEO BELOW
This is the second one I've purchased that has been bent. Trying my best not to use the metco setup, but damn this is getting frustrating.
I tried to straighten it, but I just made it worse. The shaft seems to be quite malleable - the pulley itself bang on, just the inside...
Got an MGW with orange handle? Wish you had a brand new Tri-ax instead?
Well this is the perfect opportunity for you!!!
My tri-ax is brand new, still in its (opened) box. I'll do a straight trade.
Conditions:
-Must have orange handle
-Must be in excellent condition.
-Must include...
I purchased this 2004 Cobra last week - the owner didn't want to deal with rebuilding the motor.
I know the engine needs to come apart, but it's going to be a while before I find the time and money to do it - so for now I'm just trying to figure out by sound what it is.
Its very loud and...
I've been dreaming of this car since 2009 and finally, I have it :D
So here it is:
04 Cobra Convertible, Oxford White, Black suede
Motor makes a knocking sound, going to need a rebuild.
-63,000 kms
-Ported Eaton
Borla Cat back w/Stingers Exhaust
BBK LT Headers
BBK catted X
PPRV Delete
JLT...
Hey Guys,
I have my eye on a mark viii motor for a real good price - the motor has about 60,000 mi on it. I would like to use it in my 04 cobra but am worried that using a higher mileage aluminum block might have longevity issues. If it were steel, I wouldn't be worried at all about mileage...
Here is my criteria:
-Paint must be in great shape
-Interior must be in great shape
-Low miles - less than 50K pls
-Clean title/title in hand
-Must be a complete car - blown engine/drive-train components are fine.
I have trailer and cash in hand. I live in Toronto, On, so be please be...
Here is my criteria:
-Paint must be in great shape
-Interior must be in great shape
-Would prefer to have IRS or have all the OE IRS components available
-Low miles - less than 50K pls
-Clean title/title in hand
-Must be a complete car - blown ingine/drivetrain components are fine
-Must have...
-Rebuilt engine has less than 5000 kms on it.
-Teksid Block
-B-heads w stock cams
-Diamond 5cc pistons (9.5:1 compression)
-Manley H-beam Rods
-Cobra Crank
-New performance coils
-High flow water pump
-MMR race oil pump
-All accessories included - basically ready to drop in - needs EGR...