Recent content by sigjig

I ordered brakes and rotors from Rotor Pros for $200, never received parts, and no reply after numerous attempts to contact them, Stay away! https://www.svtperformance.com/threads/any-feedback-about-rotorpros-rotors.904993/

My '03 Cobra makes a hissing sound when I turn the steering wheel left, or right. This year is the first time I've noticed it. The car has 32K on it, I changed the fluid at 26K, the fluid level is full, no apparent leaks or unusual feel in the steering wheel. Any suggestions, or opinions? Thanks...

I see now the 4 threads stand out very clearly..

Am I missing something or not? In the pictures of the heads that you posted I see many more than 4 threads in the spark plug holes. If these are are the DA heads, why don't we see 4 threads? I'm in a simile;ar station with my '03. I believe Im getting the tick issue. I'm just beginning to...

Thanks for the reply.

As followup, I finally was able to move the c-clip on the inward side of the roller assembly against the taper on the axle shaft. Then the roller assembly was able to move inward also, allowing the thin retaining c-clip that's hidden by the roller assembly, to be removed. The roller assembly...

I'm about to use this technique for my Borla pipes also. I read this post a couple of years ago, and was very impressed with your results. I was hoping to see the original pictures that were posted, but couldn't find them. I'll post mine when the the job is complete.

If the answer to my question is posted somewhere else on the forum, I apologize, I couldn't find it. I'm replacing the IRS bushings and differential cover on my '03 Cobra. In the process of removing the left half shaft, we tore the inner CV boot. It's apparent that the 3 roller assembly at...

Nice job on the bushing and differential cover replacement! I'm almost finished with the same job on my'03. As you stated the the FTBR team and the parts supplied were awesome. Any issues that I had were self induced. My only remaining issued is to replace the inner CV joint boot. I haven't as...

I am going to replace the IRS bushings with the FTBR bushing kit and replace the differential cover with the Ford Racing cover. If we find that the ring and pinion, or the clutch pack needs work, are any special tools needed to disassemble/ reassemble the gtear or clutch pack? If so, what would...

I have a stock 01 Cobra with cylinder misfire codes that change each time the codes are cleared. The first set of codes said cylinders 3 and 7 had a misfire. The plugs and coils were pulled and everything looked fine. The coil from #7 was swapped with the coil from #6. Drove the car until the...

I have a 03 Cobra I just bought. It has less than 24K on it and has been meticulously maintained and cared for. It has a 2.8 upper pulley,Amazon ported blower, throttle body and plenum. It was tuned by Amazon, dyno'ed at 483 rwhp/486 rwtq. The problem I've been having is very so often the...