Recent content by Sargent1

Old track toys - 1993 Cobra and 1995 R #86 New track toy - 2002 ZO6

1991 Ford Mustang GT, Light Blue over Silver with Gray Leather interior. Florida/South Carolina car. Drivetrain is stock, 302ci/5.0L with automatic transmission and 2.73 gears. The exception to stock is a K&N panel filter. Current mileage is 95,079. Runs perfect. The engine has been...

Show-worthy track car, 1993 Cobra #4123. Many pictures and additional information posted at this link - http://www.svtperformance.com/forums/showthread.php?t=481743 This is a black car with gray interior with 71,000 miles. See the extensive parts list below. All parts are new within the last 11...

Bought a ZO6, so need to make room in the garage. Unfortunately, that means selling my show-worthy track car, 1993 Cobra #4123. This is a black car with gray interior with 71,000 miles. See the extensive parts list below. All parts are new within the last 11 months. I've tracked it at Road...

Here's the background. It was a 69k, stock longblock and intake with an old school Steeda #18 installed in '95. It also has the X3Z ECM with the stock Cobra 70mm MAF, but it has a chip burned by APE (are they even in business anymore?) from the same time frame. Recently, I installed FRPP X305...

Think this would be a good discussion (and I'm bored and stuck in Ankara, Turkey). I've tracked mine five times since I bought it last December. Road Atlanta, Roebling Road and Carolina Motorsports Park. Looking forward to some more mods over the winter and many track days next year. List...

To those who use these wheels, what do they weigh? If you know anyone with a set for sale, I'm a buyer, need 5 lug, 17x9. Thanks. Chris [email protected]

Speaking with Maximum Motorsports, I purchased a brake proportioning valve to try to balance the brake pressures after upgrading the fronts to 13" Cobra spec. As such, to facilitate removing the stock 5 port proportioning block (as opposed to the 4 port block found on 5.0 GT/LXs), I have to...

Speaking with Maximum Motorsports, I purchased a brake proportioning valve to try to balance the brake pressures after upgrading the fronts to 13" Cobra spec. As such, to facilitate removing the stock prop block, I have to jumper one line and tee two lines into one from the master cylinder...

If you've got a set of Forgeline RS for sale, PM, email or call me. I need 5 lug, 17x9 with Mustang offset (79-04 fits my car). Thanks, Chris [email protected] 8435098148

Just asking. I'm driving up from Charleston SC for the day to run it a couple times. Triangle Porsche club and a Lotus club is on the schedule. Regards, Chris.

Thought there might be some interest in seeing my 1993 Cobra project. Finished the five lug conversion and suspension install Friday morning at 1100, then drove it 380 miles to the Year One event at Road Atlanta. The engine has 69,500 on it, ported iron GT40 heads, ported intake and old school...

I've got kids that ride in the backseat often, so a roll bar is not an option. A harness bar fits my needs best for street driving and open track events 5-6 times a year. I saw a 90 GT at Year One this weekend that had a really nice harness bar that he said was for a 2000 Corvette. I believe...

I've got kids that ride in the backseat often, so a roll bar is not an option. A harness bar fits my needs best for street driving and open track events 5-6 times a year. I saw a 90 GT at Year One this weekend that had a really nice harness bar that he said was for a 2000 Corvette. I believe...

All, Offered for sale - 1995 Ford Mustang Cobra R, Production Number 86 of 250, VIN 1FALP42C1SF213553. It’s a fantastic driving experience. Turn-in is sharp and immediate. The brakes are impressive, but it’s the torque you’ll remember. This is a true factory race car. The 5.8L/351ci...