NotsoFastFreddie's latest activity

Going to go with MM bits thru Full Tilt!

https://www.fulltiltboogieracing.com/ https://www.fulltiltboogieracing.com/FT_6100.htm Paul

Well good news. My welds were perfect and alignment shop said my numbers were spot on. Ill be adding gussets to build a little more...

Well good news all around. I was able to remove ears, clean and reweld. Monday my Alignment shop confirmed perfect inspect rear numbers...

After alignment check, if good I’ll pull back off, both sides and add gussets to the thin tabs I’ll post pictures when completed

I have read about failing KB lower control arms in the forums for years now, if not decades. If I were in your shoes, I’d remove one and...

KB said you cant use stock Cobra lowers with their modified IRS Cradle

I pulled it off last night and welded it back up. Its back on the trailer heading over to my alignment shop. If he confirms in spec Ill...

I’ve welded up one side already that was on a weld seem and caught it before it broke away Had it aligned and all good This new break...

2002 35k 1999 Ford Mustang Cobra. No racing just High Performance road course track days. 4-5 a year, 20+ years Driver side weld...

Old thread same subject MY KB IRS lower control arm failed. One turn on road course away from a very bad outcome 900.00 to replace...

Broke my Kenny Brown rear lower control arms on road course. Second time. First time weld failed and was able to rear. Second one other...

I did Thanks for your interest

Costa Mesa CA