Recent content by martimus_prime

Thank you...I saw yours a few posts up...SHARP! I agree the black vs white stripe make the car look completely different. Happy driving....I’m hoping for some warmer temps this weekend...

Picked up a 2019 Race Red, chassis K1788....1 owner, 2600 miles and not even a scratch on the underbody shields. Original owner is getting a GT500. Carbon IP Handling Package Electronics Package Car cover Drove it home 400 miles and ready to enjoy! I must say the seats, although not the race...

Totally agree with Bill, the prices have gotten extreme, but the buyers will always dictate the price. There is a dealer by me that just got a 14 Deep Impact Blue w/ Black stripes, PP, Track Pack, Recaros, Nav...8k miles for $60k....I will keep an eye on what it actually sells for. My theory...

PM sent

I’ve had good success with Nitto NT05’s on all 4 corners for leisure and some spirited street driving. If your still on 17’s...amazon has 275’s for $150 each and 315’s for around $200. The Toyo R888r’s are great too...but will run you about $50 more per tire and for my HP levels (~500) and...

TTT

Fellow SVTP members: As the subject states, I’m on the hunt for a 2.3L Whipple. Prefer GenII, but would consider GenI as well. I’m on a budget, so not looking for 2.9L or 3.4L now as I don’t want to get into the fuel system heavily. I will also throw out that I would be removing a Steg...

Not today, but big weekend accomplishments that bled into today. Had a weeping diff cover (car had a stock diff cover and brace as I bought it). Upgraded to FRPP diff cover. While in there, threw in fresh FRPP 3.73 to spruce up the vert a bit at my power level (~500). New bearings, seals and...

Got back into it today and have the issue solved, no brake drag and fully operational parking brake! Big thanks to everyone and hotcobra03....it’s amazing how much simpler life can be when you read the service manual. Straight forward to re-wind the lever spring, hold it with a small...

Thanks for everyone’s help and assistance! Good news is that nothing was messed up on the caliper side, everything installed correctly and for good measure the hub but still clicks at 250ft-lb. The issue is on the cable adjuster side and I was in pretty deep before I read up and unfortunately...

Thanks for the tips everyone...really appreciate it! I will get back into it tomorrow and let you all know. Whatever it is, I feel it will be pretty obvious!

Thanks, that will be where I start! Stay tuned!

Looking for a little advice on where to look first. Recently had the rear end of the car apart upgrading to the Ford Diff cover. While doing this I also replaced the drivers side rear wheel bearing and hub that was pretty galled, fortunately the knuckle was still ok. Got everything back...

Quick Strike: Thanks for sharing the spreadsheet, lots of good information in there and providing some guidance for newbies like me! Oldpaint: Thank you as well!

Franky: These 03/04 cobras have some wild build variance, no two are identical. For my setup, I run a hub centric 1/2 spacer for my 315s to clear the IRS bolt, have adequate clearance to the exhaust and give the stance profile I like. I’m on stock springs with 1/3 coil cut (with isolators) and...