Recent content by lilnatedogg21

i put and e-cam in mine 95 cobra, and it comes stock with the 1.7 rockers, i was wondering if I should put 1.6 rockers on it, i have heard i would have more power?

APE chip was on car, we took it off, cuz it was makin car run rich and gettin too much gas...we think. After taking the chip off and put wires back together, car wont start? YOu can hear it clicking, regardless if the chip is put back on or not, it wont crank? Anybody know hat is wrong or how...

I want to wire the fog lights up so that when i turn the parking lights on, that I can turn the foglights on at the same time? Anybody know how to re-wire that? I also need to replace my oil pan gasket, what all do I have to take off to get the oil pan off?

1995 Cobra, 4.10 gear, e-cam, cold air induction, pro chamber with 2 1/2 in cat back, crank pulley, bypassed smog pump, msd ign. thanx

I installed an e-cam in my 5.0 but a friend is wanting me to help him install cams in a 4.6. Is this harder to do than a cam in a 5.0? What all would you have to do to the 4.6?

A few weeks ago I went to downshift when i put it in neutral from 2nd i started to make a stop, and the car died. Ever since then, when i downshift, the car drops rpms and dies unless i mash the throttle, is that the throttle position sensor? Thanx

when i change a cam, what gaskets do i need? I have the intake gaskets and the water pump gasket, i was told i may need valve covere gaskets and timing chain gasket. thanx

are the stock roller rockers 1.6 or 1.7? I am planning on puttin and e-cam in this week and jsut wanted to know which rockers....thanx

I am put an "e" cam in my 95 cobra, i was wondering if I should buy new lifters and valve springs also. Not sure if i need to or not, the car has 68000 miles. And about how long do you think it will take to put a cam in? about 8 hours or so?

Is anybody going to fun ford weekend in Commerce,Ga? If so I'd love to meet yall.

I put eibach sport-line springs on my 95 cobra the other day, and it sits a whole lot lower than it did, but i have a friend that has a 95 cobra with the eibach pro-kit and his front end sits lower than mine, he has had them on the car for about 2 months. Is it just that his have settled and...

What is the widest tire that will fit onto the stock 95 cobra wheels? thanx....I was wanting like a 275 or 285, but i don't thin they will fit....thanx

anybody have an e cam in a 94 or 95 cobra, if so do ya like it? Sound good?

How hard is it to install headers on a 95 cobra? How long should it take to install them. I have installed them on a fox body beofre, but fox bodies have more room. Thanx

I am looking at buying a double "r" hood. It is a cobra r hood, but taller, i think it is like 3 inches tall. Does cervini have this hood, if not, where can I find it? If anybody has one, does it fit good, and how much was it?