guevoncito's latest activity

Hi Everyone, Update. The light still stays on all the time now. Car was on the dyno yesterday with datalogging. Tuner is happy, car...

Thanks BJ. I have a dyno session scheduled with the tuner for right after the first of the year. Hopefully this will provide some...

Thanks Vinnie! Great info. I will be relieved once I can find out what's causing this strange behavior. The Whipple came off, went...

Thanks again. Going to check all of these things over the weekend when I can get the car up onto the ramps. I had one occurrence of...

Thanks for the reply. I'm pretty sure there are extensions for the front sensors. I will have to get under the car to see for sure...

Hi All, Would like to see if anyone with a 13/14 has encountered this issue, and if there is a good long-term fix. My car will warm up...

Catmonkey is corrected - VMP is the only source for a 1" inlet and outlet in an off-the-shelf intercooler. I have the KB Bigun I/C and...

Thanks for the info. All good things to consider. After my IC pump update I'm pretty sure I'll still want to milk some more flow out...

As far as I know VMP is the only source for a 1" inlet and outlet in an off-the-shelf intercooler. J2 is still performing their flow...

I'm doing my updates in phases now. I installed my DOB Titanic heat exchanger about 2 months back. Next on the list is an IC pump...

I was able to get the intercooler & DOB heat exchanger plumbed using pre fabbed 1” hose from Pegasus Racing. It’s tight with the vmp...

Thanks for the kind words. I believe flow was projected to be around +20GPM, I never actually tried to measure it myself. Large plumbing...

Sorry to bump an older thread. For your setup, do you know what kind of flow you're getting through the entire system? I'm about to...

Delete me.

I live in Texas...for my last inspection @ Jiffy Lube it didn't seem to be an issue. But the guys doing the inspection were drooling...