Recent content by blackandblue223

I've gone back and forth about selling it for a while, but I think it's time to let it go. It's a mineral grey 01 cobra with roughly 100k on the clock. The motor's tapping/knocking, it currently doesn't have a trans in it, but I can throw in a rebuildable 3650 if you want. It also has some body...

I have a 99-01 T45 for sale. I was told it had about 60k miles on it when I got it. $450 OBO. It's still in the car, but if I have any interest, I'll pull it out asap. PM me if interested. Thanks.

Hey guys, I just dropped my newly rebuilt motor back in this weekend, and fired it up for the first time last night. At first everything sounded fine, but after giving it a little throttle, it developed a slight tick that comes and goes in the passenger side head. I pulled off the valve cover to...

Hey guys, I'm wondering if any of you have any experience with pacesetter longtubes. I ordered some, and was surprised, and kind of pissed that they have 6 threaded holes all-in-all on them. Two are on the collectors for the O2 sensors, one is for the EGR tube, and I've got no clue whatsoever...

Hi guys, I've got a bassani catted x for sale. It only has about 4000 miles on it. Everything is in good shape, I'm just going with an offroad x. $350

I have an MGW short throw for a TR3650 for sale. It's in good shape, I just don't need it anymore. I'll take $100 shipped for it. I also have a bassani catted x-pipe that was only on my car for 3500 miles or so. I'd like to get $350 for it. Also, if anyone's interested in a rebuildable...

I've got an 01 cobra, and I'm rebuilding my 4.6 and wondering how exactly the thrust bearing gets installed. I've seen a million different people say a million different things, and I just want to make sure everything goes together right.

So I've decided I'm definitely going to do a 5.4, but I'm wondering about my k-member options. I know that k-member spacers will lower the engine enough, but I'd love to save a little weight in the front end as well. I've seen a couple different aftermarket k-members online, but I don't know...

Hey guys, I'm thinking about doing a 5.4 swap, but I'm not sure about intake options. I'd like it to clear the stock hood, and so far I haven't found anything that looks like it would.

Hi guys, I've got a couple of things from my cobra that I'm trying to sell. I can get pics if anyone wants them, just let me know. Mgw short throw for TR3650 - $120 TR3650 from 01 Cobra, 1st and 3rd synchros are shot -$250 TR3650 from 03 Mach 1, 2nd and Reverse synchros are shot -$250...

Hey guys, I've got a mineral grey '01 Cobra that I can't decide if I want to sell or not. I rebuilt the motor and then recently I've had low oil pressure. As of right now the motor still runs and sounds fine but when I cut the oil filter open I did find small amounts of bearing pieces in it, so...

I drove 250 miles to the beach, probably another hundred or so while I was there, and on the day I go to leave, I lose oil pressure at a stop light. I pull pull over to check things out, and after some investigation, I realized it only loses oil pressure at idle. As soon as I hit the gas and...

60' 2.201 ET 13.934 MPH 102.91 Only mods are a cold air intake of some sort, a bassani catted x, bassani catback, and SRA. My second gear synchro is out, so I'm sure banging it into gear didn't help too much. I've seen better times than this stock, so I'm just wondering if it's a good time...

I've tried different fluids, I picked up an adjustable clutch cable, tried both the stock shifter and my mgw, but the shifts are still pretty difficult and really crunchy. I'm not grinding gears or anything, but the shifts just aren't smooth. Is there something else I could try? Or is that just...

I've decided that this winter i'm going to start my n/a build, and i'm wondering what the best option is for heads. I've seen a couple guys on here using the 03/04 c heads. I've got an 01. Is it worth it to pick up a set of thrm? Or would hand porting my heads be just as good? Thanks.