Blowncobra_97's latest activity

I have a 97

Glad you got it figured out. Definitely sounded like a pump issue as my car did the same thing when the pump was taking a dump. What...

Sewer clean outs.

So far so good with mine, just bolted it up.

In the old bbk throttle body it was blocked off, there is no inlet in the Accufab throttle body.

I have that tied into the pipe before the throttle body.

Idle Air Control IAC Restrictor Plate Fit for Ford Mustang V8 V6 GT 4.6 5.0 3.8 1986 - 2004 https://a.co/d/5ffMT6f

You have to cut that out. Dremel worked good for that. Stuffed a rag behind it and had the shop vac sucking the dust while i was cutting.

Check this out! Idle Air Control IAC Restrictor Plate Fit for Ford Mustang V8 V6 GT 4.6 5.0 3.8 1986 - 2004 https://a.co/d/5ffMT6f

I put a procharger 3 core race cooler on my car, flows nicely.

Switched out the pumps, made sure everything was ground correctly, adjusted the fuel pressure...was way too low, and the car runs strong.

If it’s 6 speed magnum. Otherwise I’d go tkx

Swapped.

Mickey Thompson ET Street R's hook amazing, just got them in a 325

Can't go wrong with a t56 magnum or tr6060