What did you do for your Terminator today?

[blwn89gt]

Today I got around to running some of the fuel lines to change my fuel system over to a traditional return set up from the deadhead setup. I already had the front passenger rail fed from the dead head set up, so I just ran another feed to the front driver side rail, added two return lines off the back to the regulator. I was short about 2’ on the last line I need to make for the supply from the filter to the Y block. So I ordered more line from Fore. We’re getting snow here now in NY so I’m in no rush.

Sent from my iPhone using the svtperformance.com mobile app

 

[gotjack]

Had her out for some data logging, getting that sleeper sauce lol waiting on a bunch of carbon parts to show up

Sent from my iPhone using Tapatalk

Nice. How’s the weather? We’re below zero here this past week.
What do you have done as far as suspension? Wheels 18? What size tires are you running?


Sent from my iPhone using the svtperformance.com mobile app

 

[CobraVenom01]

Nice. How’s the weather? We’re below zero here this past week.
What do you have done as far as suspension? Wheels 18? What size tires are you running?


Sent from my iPhone using the svtperformance.com mobile app

It was nice yesterday, 55 and sunny, I love the cold so this is as close to that as we get lol

It’s got the stock bilsteins on eibach pro springs no ISO’s in front and 1 iso in the rear. Maximum Motorsport caster camber plates.

I have full length subframe connectors to go on and I need to get the FTBR irs kit.

Wheels are 18s - 275s up front and 325/35 waiting to on in the rear to replace the 315s

Traction is a serious issue with the 3.0 Whipple on 24lbs lol

Sent from my iPhone using Tapatalk

 

[blwn89gt]

Had her out for some data logging, getting that sleeper sauce lol waiting on a bunch of carbon parts to show up

Sent from my iPhone using Tapatalk

I love the blue valve covers. I really contemplated doing mine blue but couldn’t do it because I feel with the Zinc yellow engine bay it won’t look right. I just went black instead.


Sent from my iPhone using the svtperformance.com mobile app

 

[MG0h3]

I praise you guys for keeping after it.

I’ve started my car once in the last 12 months.

Jeep is 13 months.

I dread my 2 car garage. No room.


Sent from my iPhone using svtperformance.com

 

[CobraBob]

It was nice yesterday, 55 and sunny, I love the cold so this is as close to that as we get lol

It’s got the stock bilsteins on eibach pro springs no ISO’s in front and 1 iso in the rear. Maximum Motorsport caster camber plates.

I have full length subframe connectors to go on and I need to get the FTBR irs kit.

Wheels are 18s - 275s up front and 325/35 waiting to on in the rear to replace the 315s

Traction is a serious issue with the 3.0 Whipple on 24lbs lol

Sent from my iPhone using Tapatalk

Nice setup!

Man does she look badass in this photo you posted. I was surprised to read that you had not already installed full-length subframe connectors. With all that power you're putting down, stiffening the chassis going to be a nice plus, improving traction (along with the tire upgrade) and keeping the weight planted more evenly. Summer time is gonna be fun time!

 

[LS WUT]

I praise you guys for keeping after it.

I’ve started my car once in the last 12 months.

Jeep is 13 months.

I dread my 2 car garage. No room.


Sent from my iPhone using svtperformance.com

I can watch after your CCW’s for you!

 

[CobraVenom01]

Nice setup!

Man does she look badass in this photo you posted. I was surprised to read that you had not already installed full-length subframe connectors. With all that power you're putting down, stiffening the chassis going to be a nice plus, improving traction (along with the tire upgrade) and keeping the weight planted more evenly. Summer time is gonna be fun time!

Thanks Bob, honestly the biggest reason is because I dread having someone weld them in. Don’t want any issues like burnt carpet etc.


Sent from my iPhone using Tapatalk

 

[2003RedfireVert]

Thanks Bob, honestly the biggest reason is because I dread having someone weld them in. Don’t want any issues like burnt carpet etc.


Sent from my iPhone using Tapatalk

My SFC have been sitting for over 3 years for the same reason…and my car is a convertible with close to 700w…

I have a shop I trust they are over an hour away and I haven’t made it a priority to get the car down there for the install.

 

[Bullitt1448]

There should be no reason to set the carpet on fire welding in subframe connectors. They weld to the factory subframe and that is at least 2” away from the floor pan.

 

[CobraVenom01]

There should be no reason to set the carpet on fire welding in subframe connectors. They weld to the factory subframe and that is at least 2” away from the floor pan.

Exactly, yet these **** stains still manage to do it


Sent from my iPhone using Tapatalk

 

[Bullitt1448]

Exactly, yet these **** stains still manage to do it


Sent from my iPhone using Tapatalk

That’s sheer incompetence, welding in subframe connectors is easier than welding in exhaust systems.

 

[TerminatoRS]

I praise you guys for keeping after it.

I’ve started my car once in the last 12 months.

Jeep is 13 months.

I dread my 2 car garage. No room.

And I thought I was getting bad. 136 miles since May 2023. Luckily I have the garage space so it's not as big of a deal for me. lol

 

[jessie_sanders]

I praise you guys for keeping after it.

I’ve started my car once in the last 12 months.

Jeep is 13 months.

I dread my 2 car garage. No room.


Sent from my iPhone using svtperformance.com

Don't blame you. I'd be too busy chasing that Latina booty around.

Subscribe to my onlyfans

 

[Venom351R]

was quite the turbulant few weeks, was planning on buying an OW Terminator but the owner did not seem all that motovaited to sell it and lacking things like a bill of sale being sent to me for over two weeks I decided to move onto something else and closed the deal on this one yesterday, pending some paperwork stuff and shipping its all but a done deal. These are from the for sale add, I tried posting ones that I took yesterday but it says the file size is too big even though its under the size limit.

 

[*Jay*]

was quite the turbulant few weeks, was planning on buying an OW Terminator but the owner did not seem all that motovaited to sell it and lacking things like a bill of sale being sent to me for over two weeks I decided to move onto something else and closed the deal on this one yesterday, pending some paperwork stuff and shipping its all but a done deal. These are from the for sale add, I tried posting ones that I took yesterday but it says the file size is too big even though its under the size limit.

View attachment 1825670View attachment 1825671View attachment 1825672

Noice!!! Got any details???

 

[PC03GT]

was quite the turbulant few weeks, was planning on buying an OW Terminator but the owner did not seem all that motovaited to sell it and lacking things like a bill of sale being sent to me for over two weeks I decided to move onto something else and closed the deal on this one yesterday, pending some paperwork stuff and shipping its all but a done deal. These are from the for sale add, I tried posting ones that I took yesterday but it says the file size is too big even though its under the size limit.

View attachment 1825670View attachment 1825671View attachment 1825672

Congratulations on the Sonic

 

[BlksvtCobra01]

was quite the turbulant few weeks, was planning on buying an OW Terminator but the owner did not seem all that motovaited to sell it and lacking things like a bill of sale being sent to me for over two weeks I decided to move onto something else and closed the deal on this one yesterday, pending some paperwork stuff and shipping its all but a done deal. These are from the for sale add, I tried posting ones that I took yesterday but it says the file size is too big even though its under the size limit.

View attachment 1825670View attachment 1825671View attachment 1825672

Nice, I love OW, but would rather have SB any day over OW that’s just me.


Sent from my iPhone using Tapatalk

 

[Venom351R]

Noice!!! Got any details???

Ported Eaton, Kooks Long tubes, upper / lower pulley, authantic Saleen wheels walbro pumps weld in subframe connectors, upgraded swaybar, Bassani Exhaust, one of those painted JLT intakes everyone likes, CC plates, clutch is unknown, all the work was done by the owner before him but it is upgraded. I'll try and post more pics if it doesn't work then there wont be any lol. Needs a good cleaning overall. Nothing I can't handel once I get it. Its far from perfect but what I wanted when looking for one.

 

[Venom351R]

Congratulations on the Sonic

Thanks!

Nice, I love OW, but would rather have SB any day over OW that’s just me.


Sent from my iPhone using Tapatalk

I always liked OW but after now seeing Sonic in person...no comparision.