WILL ONLY CONSIDER TRADES FOR 03-04 Cobra (coupe), 11-12 GT, Maybe a C5z. I am willing to add cash on top.
Price is 15k IDC if you think it is worth that or not.
I just installed a steeda bump steer kit so car is on jackstands the weather should be good tomorrow so I will wash it up and get good interior and exterior photos.
1997 Cobra Crystal white 140xxx miles on body
Tan interior (driver seat has a few tears but passanger seat is mint.
Interior:
Water temp ,boost gauge, and plx wideband,raptor shiftlight
Wheels are black weld prostars
15/3.5(MT Front Runners) 15/10 (MT 26/10 drags)
Suspension:
Front:Upr tubular k with coilovers
Strange Struts
Steeda bump steer
Rear:Baseline uppers
Racecraft lowers
50/50 Lakewood shocks
Rundown of build:
Teksid block 5.0L stroker
MMR 900 rotating assembly ( forged crank, eagle rods, and -17 cp pistons )
ARP 2000 rod bolts
ARP main studs
ARP head studs
Stage 3 Super Charged 4v Comp cams
Crower Springs and retainers
Comp Cams adjustable cam gears
Billet timing gear
Melling Oil pump
MMR 7qt Oil Pan
04 cobra 4v ported heads
97 timing cover
01 cobra intake ( ported short runner by Al Pappito. )
Accufab big oval throttle body
ATI Super Balancer
Fuel: 8an from pump to rails
Aeromotive eliminator
sumped tank(by me)
80lb inj
Aeromotive rails,
Power adder: MMR hotside
Billet wheel/bb/watercooled Precision 76gts
Treadstone trv 259
3" coldside
hpx maf
Tranny: tko 600
spec 3+
pro 5.0
Rear: new 3.55 fms gears ,new bearings,seals,31 spline diff,welded axle tubes,31 spline strange axles
Bad:Only has a 4" dumped downpipe atm so it is a little loud, Paint is a 7/10 mainly because of a chip on front bumper lol.
Pump gas with 16* timing made 800rwhp
This was 21lbs with a 50/50 mix 93/c16 with 16* timing. Also we had alot of tirespin so we are not sure what it really makes after 6000 rpm lol.
[/QUOTE]
VIDS:
[youtube_browser]BK5yp5zCSAM[/youtube_browser]
Idle Vid go to the 30sec mark.
[youtube_browser]dcd4pWMlvt0[/youtube_browser]
Pictures!
Engine:
Interior
Chip on bumper:
Rest of pics here:
turbo project pictures by badblacklx - Photobucket
Price is 15k IDC if you think it is worth that or not.
I just installed a steeda bump steer kit so car is on jackstands the weather should be good tomorrow so I will wash it up and get good interior and exterior photos.
1997 Cobra Crystal white 140xxx miles on body
Tan interior (driver seat has a few tears but passanger seat is mint.
Interior:
Water temp ,boost gauge, and plx wideband,raptor shiftlight
Wheels are black weld prostars
15/3.5(MT Front Runners) 15/10 (MT 26/10 drags)
Suspension:
Front:Upr tubular k with coilovers
Strange Struts
Steeda bump steer
Rear:Baseline uppers
Racecraft lowers
50/50 Lakewood shocks
Rundown of build:
Teksid block 5.0L stroker
MMR 900 rotating assembly ( forged crank, eagle rods, and -17 cp pistons )
ARP 2000 rod bolts
ARP main studs
ARP head studs
Stage 3 Super Charged 4v Comp cams
Crower Springs and retainers
Comp Cams adjustable cam gears
Billet timing gear
Melling Oil pump
MMR 7qt Oil Pan
04 cobra 4v ported heads
97 timing cover
01 cobra intake ( ported short runner by Al Pappito. )
Accufab big oval throttle body
ATI Super Balancer
Fuel: 8an from pump to rails
Aeromotive eliminator
sumped tank(by me)
80lb inj
Aeromotive rails,
Power adder: MMR hotside
Billet wheel/bb/watercooled Precision 76gts
Treadstone trv 259
3" coldside
hpx maf
Tranny: tko 600
spec 3+
pro 5.0
Rear: new 3.55 fms gears ,new bearings,seals,31 spline diff,welded axle tubes,31 spline strange axles
Bad:Only has a 4" dumped downpipe atm so it is a little loud, Paint is a 7/10 mainly because of a chip on front bumper lol.
Pump gas with 16* timing made 800rwhp
This was 21lbs with a 50/50 mix 93/c16 with 16* timing. Also we had alot of tirespin so we are not sure what it really makes after 6000 rpm lol.
VIDS:
[youtube_browser]BK5yp5zCSAM[/youtube_browser]
Idle Vid go to the 30sec mark.
[youtube_browser]dcd4pWMlvt0[/youtube_browser]
Pictures!
Engine:
Interior
Chip on bumper:
Rest of pics here:
turbo project pictures by badblacklx - Photobucket