02GreyGhost
New Member
I have a 1993 Mustang GT Converted to Carb. Setup bored and stroked to a 347!
$7,000.00 OBO!!!
The car:
Model: 1993 Ford Mustang GT
Color: Navy Blue
Mileage: 124,xxx (on chassis)
Engine Type: 347 Stroker
Transmission Type: Auto (C4 with manual valve body)
Modifications:
347 Stroker kit (Street fighter)
600 Edelbrock Carb
SVO Heads Ported and Polished
Edelbrock Super Vicktor Intake
Electric Fans (Toggle Switch)
Full Long Tube Headers (Custom made)
Full 3 1/2 H-Pipe to 3 1/2 inch exahust Pushed into Custom mufflers with plates that you can remove to make it straight out
x303 Cam
1.6 Roller Rockers
Street Fighter Kit used.
Piston Material 2618-t61 Forged Aluminum
Top Type Reverse Dome
Piston Head Volume -20.1cc
Standard Piston Bore (in) 4.0000 (Select over bore above)
Compression Height (in) 1.175"
Ring Type Moly-Pre Fit
Crankshaft Vendor Probe Industries
Crankshaft Material Cast Steel
Stroke (in) 3.400
Crankshaft Main Journal Size (in) 2.248"
Crankshaft Rod Journal Size (in) 2.123"
Connecting Rod Vendor Probe Industries
Connecting Rod Material 5140 Forged Steel
Connecting Rod Length (in) 5.315"
Connecting Rod Type Machined Beam (Bushed)
C4 Transmission with manual valve body with B&M Shift kit
Aluminum Drive Shaft
Sub Frame Connectors
Malory Fuel pump
Cons:
Interior needs new carpet and missing some console pieces.
Passenger window sticks just alittle bit
Hatch does not Seal up but stays shut
Could use some paint on the front lip and some rear tires
Front Seat belt needs replaced.
I need this car either traded or sold. It is not really what I need. It is setup for the track and I dont have time to go out and race it. You could make it street legal with registration but it is not ideal. I am just looking for something alittle more daily drivable or streetable. I am just asking for this amount so please dont hesitate to make any offer. For trade I would like a sn95 cobra or a new edge GT. Let me know what you have! Thanks.
979 299 8732.
$7,000.00 OBO!!!
The car:
Model: 1993 Ford Mustang GT
Color: Navy Blue
Mileage: 124,xxx (on chassis)
Engine Type: 347 Stroker
Transmission Type: Auto (C4 with manual valve body)
Modifications:
347 Stroker kit (Street fighter)
600 Edelbrock Carb
SVO Heads Ported and Polished
Edelbrock Super Vicktor Intake
Electric Fans (Toggle Switch)
Full Long Tube Headers (Custom made)
Full 3 1/2 H-Pipe to 3 1/2 inch exahust Pushed into Custom mufflers with plates that you can remove to make it straight out
x303 Cam
1.6 Roller Rockers
Street Fighter Kit used.
Piston Material 2618-t61 Forged Aluminum
Top Type Reverse Dome
Piston Head Volume -20.1cc
Standard Piston Bore (in) 4.0000 (Select over bore above)
Compression Height (in) 1.175"
Ring Type Moly-Pre Fit
Crankshaft Vendor Probe Industries
Crankshaft Material Cast Steel
Stroke (in) 3.400
Crankshaft Main Journal Size (in) 2.248"
Crankshaft Rod Journal Size (in) 2.123"
Connecting Rod Vendor Probe Industries
Connecting Rod Material 5140 Forged Steel
Connecting Rod Length (in) 5.315"
Connecting Rod Type Machined Beam (Bushed)
C4 Transmission with manual valve body with B&M Shift kit
Aluminum Drive Shaft
Sub Frame Connectors
Malory Fuel pump
Cons:
Interior needs new carpet and missing some console pieces.
Passenger window sticks just alittle bit
Hatch does not Seal up but stays shut
Could use some paint on the front lip and some rear tires
Front Seat belt needs replaced.
I need this car either traded or sold. It is not really what I need. It is setup for the track and I dont have time to go out and race it. You could make it street legal with registration but it is not ideal. I am just looking for something alittle more daily drivable or streetable. I am just asking for this amount so please dont hesitate to make any offer. For trade I would like a sn95 cobra or a new edge GT. Let me know what you have! Thanks.
979 299 8732.