• Welcome to SVTPerformance!

WTT: 97 cobra for nice foxbody

Discussion in 'Fox-Body Mustangs' started by 1fast97Cobra, Aug 15, 2011.

  1. 1fast97Cobra

    1fast97Cobra New Member Established Member

    Messages:
    183
    Joined:
    Oct 21, 2005
    Location:
    Aberdeen MD
    I am looking to trade my 97 cobra for a 5.0. I am done with this car. It has a knock in the motor that no one can find. It was 5000 miles on the new motor with the knock. The knock is in the top of the motor. Car runs and drives fine. Car is fully built. Has the following done.

    Engine:
    4.6L bored .20 over.
    Manley h-beam rods
    J.E. SRP 80 pistons 8.5.1 comp (all cylinders just tested 2 weeks ago were putting out 155.)
    Forged 8 bolt crank
    BBK long-tube headers
    MAC o/r prochamber
    Flowmaster super 44's
    Built b-heads Fully port and plolished
    SHM stage-2 blower cams
    Professional products FPR
    42lb FRPP injectors
    Aeromotive 340lph in-tank pump
    Vortech s-trim on 10lb's
    Sniper 105mm big air MAF
    MSD coil packs

    Transmission:
    Tremec t-45 with 5000 miles on it. Came out of a 2001 cobra and had sycos replaced.
    Centerforce dual friction clutch
    Steeda tri-ax shifter
    F1 stage 1 lightened flywheel
    FRPP aluminum driveshaft
    4.10 gears on stock rear.

    Suspension:
    Tockico HP blue shocks all around
    Tockico HP blue lowering springs all the way around.
    Steeda 30mm rear sway bar
    Steeda upper and lower controler arms (needs new ones they don't like boost to much)
    Blue oval subframe connectors
    Mac camber and caster plates
    Crossed drilled and slotted rotors all around
    Hawk HPS brake pads all around

    Tires:
    Needs fronts tires
    Rear tires are Nitto 555 with 80% tread left.
    They are on 18" 95 cobra r's

    Paint is in good shape clear is peeling in a small spot on the rear bumper.
    I know i am missing alot of other stuff to. I also have a ton of spare parts to go with it. To much parts to list.

    I am looking for a foxbody in good shape with a superchager or turbo. If not a nice n/a one would be fine to.

    IMG_20100826_173145.jpg

    2010-07-15172219.jpg

    2010-07-29154059.jpg

    IMG_20100826_182928.jpg

    2010-07-15172357.jpg

    2010-05-10202047.jpg

    2010-05-15191109.jpg

    2010-05-15191148.jpg

    2010-05-15191206.jpg

    2010-05-15191238.jpg

    2010-05-15191424.jpg

    IMG_20100816_185924.jpg

    video of car open headers[​IMG][/URL][/IMG]

    Video of car with exhaust [​IMG][/URL][/IMG]
     
    Last edited: Aug 15, 2011
  2. Jcobra03

    Jcobra03 import reaper Established Member

    Messages:
    726
    Joined:
    Jun 6, 2006
    Location:
    Corydon, IN
    do you have a video of the car running with exhaust on it to hear the knock
     
  3. 1fast97Cobra

    1fast97Cobra New Member Established Member

    Messages:
    183
    Joined:
    Oct 21, 2005
    Location:
    Aberdeen MD
    added a video with exhaust. Only other video i have right know.
     
  4. lafeva

    lafeva Active Member Established Member

    Messages:
    1,996
    Joined:
    May 18, 2009
    Location:
    Leesburg,VA
    I have a bone stock coupe for sale. If u wouldn't be interested in trading car for car I would. Definitely trade for the s trim kit off the 97 plus cash. Plus im somewhat close to u
     

Share This Page