• Welcome to SVTPerformance!

wtb hot side for single turbo

Discussion in 'Turbo Cobras' started by xblownx, Nov 4, 2009.

  1. xblownx

    xblownx New Member Established Member

    Messages:
    44
    Joined:
    Apr 8, 2004
    Location:
    gainesvile Fl
    looking for headers, or complete hot side for a t 76, please call me asap, I have cash, 352 494 6913

    thanks Jimmy
     
  2. 76mmsaleen

    76mmsaleen New Member Established Member

    Messages:
    661
    Joined:
    Sep 3, 2007
    Location:
    louisiana
    mmr sells the hot side for 1399 ...
    Kit Includes all parts shown in Picture below, great for DIY Turbo kits. The MMR kit features High Quality Laser cut header flanges, TIG welded construction, V-band clamps, High Quality expansion joint, 02' sensor provisions, T-4 Flange, Wastgate Provosion and Jet Hot Ceramic Coating.

    Requires K-Member for all Applications

    Works with all T-4 Turbos (Turbo not included)

    Allow 2-4 weeks for delivery



    [​IMG]
     
  3. 76mmsaleen

    76mmsaleen New Member Established Member

    Messages:
    661
    Joined:
    Sep 3, 2007
    Location:
    louisiana
  4. xblownx

    xblownx New Member Established Member

    Messages:
    44
    Joined:
    Apr 8, 2004
    Location:
    gainesvile Fl
    thanks!
     
  5. Yaadman_GT

    Yaadman_GT Yaadman_GT Established Member

    Messages:
    591
    Joined:
    Aug 2, 2006
    Location:
    Bellevue, NE
    I've got a Hellion Single Complete Downpipe setup only from the turbo to your catback....Black High Temp coat, Upper part of DP is Header Wrapped...Wideband/O2 bung and EGT bung installed. LMK
     
  6. milenko1247

    milenko1247 New Member Established Member

    Messages:
    223
    Joined:
    Aug 17, 2008
    Location:
    Gainesville Fl
    check my thread right below yours :rolling:

    Hey guys, Im thinkin about goin t/s instead of turbo.. Just seein if anyone is interested in my turbo parts before I full decide to go t/s.. I have all of the single turbo hot side pipes, hellion intercooler for like 1500 and I have a big red procharger bov and 38mm wastegate that i would let go for around 500. I also have a t76 turbonetics turbo that has a broken shaft that is a ball bearing center... I would through this in for a 100 more with the hot side parts. Let me know what u guys think and I am in gainesville fl :rockon:
     
  7. slickv8

    slickv8 New Member Established Member

    Messages:
    56
    Joined:
    Aug 16, 2009
    Location:
    Miami
    check my thread right below yours

    Hey guys, Im thinkin about goin t/s instead of turbo.. Just seein if anyone is interested in my turbo parts before I full decide to go t/s.. I have all of the single turbo hot side pipes, hellion intercooler for like 1500 and I have a big red procharger bov and 38mm wastegate that i would let go for around 500. I also have a t76 turbonetics turbo that has a broken shaft that is a ball bearing center... I would through this in for a 100 more with the hot side parts. Let me know what u guys think and I am in gainesville fl







    Would the tubo kit you are selling fit a mach 1 and it only has the exaust up to where the catback, if you can please pst pictures very interested.
     
  8. dan03mach

    dan03mach BUSTN YO A$$ Established Member

    Messages:
    1,061
    Joined:
    May 4, 2004
    Location:
    Arlington Tx
    You can get a complete hot side from Ebay that is what I'm using and it works great. You will have to notch the fan shroud to fit the turbo but that isn't too big of a deal.
     
  9. Yaadman_GT

    Yaadman_GT Yaadman_GT Established Member

    Messages:
    591
    Joined:
    Aug 2, 2006
    Location:
    Bellevue, NE
    Any word!?
     
  10. xblownx

    xblownx New Member Established Member

    Messages:
    44
    Joined:
    Apr 8, 2004
    Location:
    gainesvile Fl
    sorry about the delay, I am going with a custom set up, thanks alot for your info
     
  11. JML81

    JML81 WIKD281 Established Member

    Messages:
    124
    Joined:
    Aug 21, 2009
    Location:
    CA
    you usin that 200 dollar stainless hot side deal ???
     

Share This Page