2002 Subaru WRX Drag Car
• Fresh 3.3L SVX engine
• 1 piece driveshaft
• R200 rear end
• Front Stock axels
• 2-GT3082R Turbos
• Air to Water Intercooler and plumbing
• Andale Wiggins Clamps on all intercooler and turbo connections
• Built automatic SVX Tranny From Tony Rigoli Performance
• Stroud Chute
• Trunk mounted 3 gal fuel cell
• 7 second certifiable role cage
• Momo seats
• 5 Point Crow Racing Harness
• Hurst auto shifter
• Momo Steering wheel
• Tial 44mm wastegates
• Custom tubular headers
• Powder coated silver under carriage
• Tilton Pedal set and master cylinders
• 2 - 90mm Accufab throttle bodies
The car is a 2002 Subaru WRX, it was stripped down to a bare metal shell and then the cage was installed and the deck lid chute hole fabricated. The car was then painted inside and out. Next the undercarriage was powder coated silver. A one piece drive shaft was made to fit in between the R200 rear end and the built auto tranny with manual valve body. The air to water intercooler is connected to the ports with Andale Wiggins clamps. the turbo plumbing is connected to the turbos and intercooler also with wiggins clamps.
The car is not running or complete. What’s needed?
• Finish off fuel system
• Wiring and engine management
• Cooling system
• Dry sump set up for the turbos
• exhaust
I am selling this car because I no longer have the time or money to dedicate to it.
I am willing to part it out many different ways.
The total package with everything listed above $7000
rolling chasis $5000 (no motor, tranny, rear end, or momo seats. basically shell and stock wheels)
3.3l svx engine $800 (never been used since rebuild)
Garrett 3082r turbos $800 a piece (they are brand new and have never been used)
TIAL waste gates $300 a piece (brand new never been used)
Transmission $2000 (never been used since rebuild)
R200 rear end $300 (never been used since rebuild)
MOMO seats $200 a piece (brand new)
For those of you who want specific parts please email me, I would like to wait until the end of the auction to part it out. My email is [email protected]
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=300146029117&ssPa geName=STRK:MESE:IT&ih=020
• Fresh 3.3L SVX engine
• 1 piece driveshaft
• R200 rear end
• Front Stock axels
• 2-GT3082R Turbos
• Air to Water Intercooler and plumbing
• Andale Wiggins Clamps on all intercooler and turbo connections
• Built automatic SVX Tranny From Tony Rigoli Performance
• Stroud Chute
• Trunk mounted 3 gal fuel cell
• 7 second certifiable role cage
• Momo seats
• 5 Point Crow Racing Harness
• Hurst auto shifter
• Momo Steering wheel
• Tial 44mm wastegates
• Custom tubular headers
• Powder coated silver under carriage
• Tilton Pedal set and master cylinders
• 2 - 90mm Accufab throttle bodies
The car is a 2002 Subaru WRX, it was stripped down to a bare metal shell and then the cage was installed and the deck lid chute hole fabricated. The car was then painted inside and out. Next the undercarriage was powder coated silver. A one piece drive shaft was made to fit in between the R200 rear end and the built auto tranny with manual valve body. The air to water intercooler is connected to the ports with Andale Wiggins clamps. the turbo plumbing is connected to the turbos and intercooler also with wiggins clamps.
The car is not running or complete. What’s needed?
• Finish off fuel system
• Wiring and engine management
• Cooling system
• Dry sump set up for the turbos
• exhaust
I am selling this car because I no longer have the time or money to dedicate to it.
I am willing to part it out many different ways.
The total package with everything listed above $7000
rolling chasis $5000 (no motor, tranny, rear end, or momo seats. basically shell and stock wheels)
3.3l svx engine $800 (never been used since rebuild)
Garrett 3082r turbos $800 a piece (they are brand new and have never been used)
TIAL waste gates $300 a piece (brand new never been used)
Transmission $2000 (never been used since rebuild)
R200 rear end $300 (never been used since rebuild)
MOMO seats $200 a piece (brand new)
For those of you who want specific parts please email me, I would like to wait until the end of the auction to part it out. My email is [email protected]
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=300146029117&ssPa geName=STRK:MESE:IT&ih=020
