Would my drag welds fit on a 03cobra?

[96lowbra]

My friend has some drag welds,he let me use for track but would they fit the size are 15x4.5 and the rear are 15x8 on 28x12.5 and 165 on front? What do you think

 

[shofe10]

Dont know about the fronts and our brakes. But the rears will fit with a little grinding on the tie-rod links

 

[03mustang92]

I would steer clear of anything that is 15". I seen where u would or could possibly have to grind on the calipers

 

[black03_cobra]

always could put GT calipers, and if its a 3.5 bs up front a 1in spacer will work if you put 3in studs in the front. and a 12.5 pretty wide need 28x10.5

 

[96lowbra]

:dw:

 

[Digital]

15" anything that isnt a pizza cutter jacked out with a spacer won't fit the fronts. The back will work with grinding depending on the BS.

 

[black03_cobra]

digital, yes you can get 15s to fit in the front

 

[96lowbra]

So what do i have todo for those 15's to fit spacers?

 

[black03_cobra]

you will need 3in studs in the front but the fronts will have to be 3.5bs for the 1in spacer to work they will stick out from the car a little but just down the track no big deal, no grinding on the caliper.

 

[96lowbra]

Would it be better to use gt calipers or 03 with that setup?

 

[black03_cobra]

depends on what you want to do if you plan on drag racing a lot and wont to keep running the 15s just get longer studs and have bogart make you some wheels, but the gt calipers are quick and easy to put on for a one time deal.

 

[Digital]

digital, yes you can get 15s to fit in the front

Yes.. I said pizza cutters with a spacer..

 

[black03_cobra]

oh my bad