would i benifit any with.E 85 ?

cobra=trouble

New Member
Established Member
Joined
Dec 12, 2009
Messages
2,008
Location
U.S.
I got 3.700 bore.stock cams and 8.5 to1comp..

Along with mods below.

How.much more.power would.i make.over 93.pump gas?
 

cobra=trouble

New Member
Established Member
Joined
Dec 12, 2009
Messages
2,008
Location
U.S.
I could easily see 80-100 RWHP more with E85 over 93 with your set up.

thanks sleeper...is.that at the same.boost level?
im ready to get.it finished now.cooler.weather is.here.

i got stock lower the pulley... b4 i had app 19Psi with 3.25 upper..i got a 3.0.and a 2.75 pulley also...not.sure.if i will have 19Psi on like b4 ..i think lotng tubes and a larger bore.might.drop the boost some...not.sure?
 
Last edited:

SVTDice

Active Member
Established Member
Joined
Dec 7, 2009
Messages
1,486
Location
Florida
The beauty of using E85 vs 93 Octane Is you can run much higher timing along with Higher boost while still being Very safe.

So you could bump up the Boost and Timing if you so wish with your build.
 

04sleeper

Runs On "Liquid Gold"
Super Moderator
Joined
Sep 17, 2005
Messages
12,579
Location
Dallas, TX
As SVTDice mentioned, you can bump up both timing and boost. I would put the 2.75 pulley on and give it whatever timing it wants until it stops making power.

I think you will be very happy with the results.
 

cobra=trouble

New Member
Established Member
Joined
Dec 12, 2009
Messages
2,008
Location
U.S.
i got.some.extr.Cash now....you i benifit with.some.cams now? remember i got at.most.8.5 to 1..i.dont want.to big.of.cams.to bleed.off.compression.even more...

i.seen wherethe.comp.cams.with.230 @.05O gain over 85 rwhp.
 

Users who are viewing this thread



Top