What's the shortest factory style oil filter?

[wheelhopper]

I installed an adapter plate on my oil filter location so I could install an oil cooler and sensors for oil temp and pressure. The adapter is about an inch and a quarter thick. It pushes the Motorcraft and Purolator Classic filter out to where it hits my sway bar and I can not mount it. Any one out there know of a shorter one than the as specified Motorsport filters?

 

[big dad]

IIRC a FL-300 should do the trick.

 

[wheelhopper]

great, thanks.

 

[FISHTAIL]

820S will probably work too, same as the FL8A, just shorter. It's what was standard on the mod motors, so you probably have a few laying around.

 

[wheelhopper]

I checked the short filter I use on the Cobra, because of the UPR K member. But the diameter of the hole, threaded area, was larger.

I picked up a Purolator filter that works today. I'll post the number later in case someone else may need it.