what size clutch?

[Slow 99]

I have a t-45 with a swapped 26 spline input shaft, and a mcloud rst clutch. I am going to switch to a spec stage 3+ but I have no clue if it is an 11 inch or 10.5 inch. please lemme know cause my rst is slipping under hard shifts and I need to swap soon

 

[Jwilso53]

I have a t-45 with a swapped 26 spline input shaft, and a mcloud rst clutch. I am going to switch to a spec stage 3+ but I have no clue if it is an 11 inch or 10.5 inch. please lemme know cause my rst is slipping under hard shifts and I need to swap soon

It all depends on which flywheel you have. Since it’s a t45 it had the 10.5 from the factory. But without pulling it apart there’s no telling if someone swapped it at some point.

if you want to have everything ready to go for a one day swap buy a flywheel and match the clutch to it. Most likely needs replacing anyway. You will need to know if you have a 6 bolt(Romeo) or 8 bolt(Windsor) crankshaft.

You will also need matching pressure plate bolts