What do you think, My Custom Grind Cam Specs?

[cgbills]

I have been talking with Livernois on coming up with a custom grind for my TT setup. Here are the specs, Please note I Do not have Notched pistons and these are on B Heads. Also I will be running a .050 head gasket.

226 Intake .475 Lift
226 Exhaust .475 Lift
115 LSA

My set up is a Livernois 298 stroker at 9.7:1 compression, Livernois Stage 3 Port polish heads with 1mm oversized intake and exhaust valves and 57 or 61 TT. What do you all think of the cam specs? Do you think it will sound lopey?

 

[Turbo98]

How much power are you looking to make? What intake do you have?

 

[cgbills]

around 750 on pump. Stock intake for now

 

[spyder1337]

Good luck

 

[Turbo98]

That's quite a bit on pump gas with that high of compression. The 57's will be starting to run out of breath so if you're after a big peak pump gas number, go with the 61's.